User manual HUMMINBIRD 797C GPS CHARTPLOTTER

[. . . ] 531519-1_A - 797c2_Man_Covers. qxp 10/24/2006 3:38 AM Page 1 797c2 GPS Chartplotter Operations Manual 531519-1_A 531519-1_A - 797c2_Man_Covers. qxp 10/24/2006 3:39 AM Page 2 Thank You! Thank you for choosing Humminbird®, America's #1 name in fishfinders. Humminbird® has built its reputation by designing and manufacturing topquality, thoroughly reliable marine equipment. Your Humminbird® is designed for trouble-free use in even the harshest marine environment. In the unlikely event that your Humminbird® does require repairs, we offer an exclusive Service Policy - free of charge during the first year after purchase, and available at a reasonable rate after the one-year period. [. . . ] To cancel saving the current track, press the LEFT Cursor key. 86 531519-1_A - 797c2_Man_Eng. qxp 11/6/2006 5:53 AM Page 87 Clear Current Track Clear Current Track allows you to clear the current track being displayed and start a new track at the present position. Use the RIGHT 4-WAY Cursor Control key to initiate clearing the current track. To cancel clearing the current track, press the LEFT Cursor key. Save Current Route (only when Navigating) Save Current Route allows you to save the current route being displayed. This menu choice will only appear when you are currently navigating a route. Use the RIGHT 4-WAY Cursor Control key to initiate saving the current route. To cancel saving the current route, press the LEFT Cursor key. 87 531519-1_A - 797c2_Man_Eng. qxp 11/6/2006 5:53 AM Page 88 Skip Next Waypoint (only when Navigating) Skip Next Waypoint removes the next waypoint from the current route. This menu choice will only appear when you are currently navigating a route. Use the RIGHT 4-WAY Cursor Control key to initiate skipping the next waypoint. To cancel skipping the next waypoint, press the LEFT Cursor key. Cancel Navigation (only when Navigating) Cancel Navigation discards the current route and exits Navigation Mode. This menu choice will only appear when you are currently navigating a route. Use the RIGHT 4-WAY Cursor Control key to initiate canceling navigation. To avoid canceling navigation, press the LEFT Cursor key. 88 531519-1_A - 797c2_Man_Eng. qxp 11/6/2006 5:53 AM Page 89 Cancel MOB Navigation (only when MOB Navigation is activated) Cancel MOB Navigation removes the Man Overboard (MOB) waypoint and exits Man Overboard mode. This menu choice will only appear when you are currently navigating in Man Overboard mode. Use the RIGHT 4-WAY Cursor Control key to initiate canceling MOB navigation. To avoid canceling MOB navigation, press the LEFT Cursor key. Remove Target (only if a Target is Active) Remove Target removes the waypoint target from the display. This menu choice will only appear when a target has already been applied to a waypoint. NOTE: See Add a Waypoint Target or Trolling Grid for more information. To Remove a Target: 1. Use the RIGHT 4-WAY Cursor Control key to remove the target. 89 531519-1_A - 797c2_Man_Eng. qxp 11/6/2006 5:53 AM Page 90 Remove Grid (only if a Grid is Active) Remove Grid removes the waypoint grid from the display. This menu choice will only appear when a grid has already been applied to a waypoint. NOTE: See Add a Waypoint Target or Trolling Grid for more information. To Remove a Grid: 1. Use the RIGHT 4-WAY Cursor Control key to remove the grid. Sonar Window (Combo view only) Sonar Window sets the size of the Sonar Window in the Combo View. Use the LEFT or RIGHT 4-WAY Cursor Control keys to adjust the size of the sonar window. (Wide, Medium, Narrow, Default = Medium) 90 531519-1_A - 797c2_Man_Eng. qxp 11/6/2006 5:53 AM Page 91 Waypoint [Name] (Most recently-created waypoint) Waypoint [Name] allows you to view the waypoints submenu for the most recently created waypoint. NOTE: You must have pressed the MARK key at least once since you last powered up the Fishing System for this menu choice to appear. To view the Waypoint [Name] Submenu: 1. Move the cursor to the desired position and press the MARK key once to save a waypoint. [. . . ] Tracks are a useful and quick method to see where you've been, and an easy guide to follow to get you back to the starting point. Generally, all GPS units have a limited number of Track Points that can be saved before the unit runs out of memory and begins erasing the first track points saved. Because of this, the user can adjust the Track Point Interval 170 531519-1_A - 797c2_Man_Eng. qxp 11/6/2006 5:54 AM Page 171 menu to increase the amount of time between when points are saved, and thus extend the distance covered by a track. Tracks can also be permanently saved to memory, and re-displayed at the user's option. [. . . ]