User manual HP MFP 178NW

[. . . ] Papier » est synonyme de « support » ou de « support d'impression ». Le réglage du type de document permet d'améliorer la qualité de la copie en sélectionnant le type de document utilisé. [. . . ] If the Wireless light blinks blue, the printer is in wireless setup mode. Continue software installation and follow the instructions in the software to set up a wireless connection. Also, see the instructions below under "The Wireless light is blinking blue. " Wireless connection mode is on but the wireless network connection is not set up yet. Verify that the printer is within the range (30 m or 100 ft) of the wireless network. If you are using a USB cable to temporarily connect the printer and computer during set Up, do not connect the USB cable until the software prompts you to do so. If you connected the cable before being prompted, unplug the cable and then restore the wireless network settings as directed in the next step. On the printer, press the Menu button and select Network > Wi-Fi Default > Restore. After the Wireless light starts blinking blue, continue to install the software. Try installing or reinstalling the printer driver, and then try printing again. If you still cannot print wirelessly, the printer and your computer or device might be connected to different networks. Check the printer's network name (SSID) info on the Configuration Report/Network summary. [. . . ] To check the Wi-Fi Direct name and password (Network Key), press and hold the Menu button on the printer control panel and select Network > Network Conf. Keep printer out of direct sunlight Keep printer in wellventilated area The information contained herein is subject to change without notice. [. . . ]