User manual HP M304A

[. . . ] EN CAUTION: To prevent damage to the printer, use only the power cord that is provided with the printer. NOTE: Internet connection is required to set up the printer and download the software driver. [. . . ] After the printer connects to the wireless network successfully, the Wireless light stops blinking and stays on. Manually configure the IP address See the printer user guide for information about configuring the IP address manually. Run the HP Smart app and follow the onscreen instructions to connect, set up, print, and more. Wi-Fi Direct allows Wi-Fi capable devices, such as smart phones, tablets, or computers, to make a wireless network connection directly to the printer without using a wireless router or access point. Connect to the printer's Wi-Fi Direct signal the same way Wi-Fi capable devices are connected to a new wireless network or hotspot. On the printer control panel, press the OK button to display the Use arrow buttons and the OK button to open the following menus: Use arrow buttons to navigate to ON or OFF, and press the OK button to enable or disable the Wi-Fi Direct feature. From the mobile device, turn on Wi-Fi, and search for wireless Select the printer name as it appears on the printer control panel. Learn more about mobile printing For more mobile printing information, scan the QR code or go to www. BEMÆRK: Der kræves internetforbindelse for at konfigurere printeren og for at hente driveren. Brug pileknapperne for at navigere til TIL eller FRA, og tryk på knappen OK for at aktivere eller deaktivere funktionen Wi-Fi Direct. [. . . ] Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. [. . . ]