User manual HP COMPAQ 6720S MAINTENANCE AND SERVICE GUIDE

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual HP COMPAQ 6720S. We hope that this HP COMPAQ 6720S user guide will be useful to you.


HP COMPAQ 6720S MAINTENANCE AND SERVICE GUIDE: Download the complete user guide (4776 Ko)

Manual abstract: user guide HP COMPAQ 6720SMAINTENANCE AND SERVICE GUIDE

Detailed instructions for use are in the User's Guide.

[. . . ] HP Compaq 6720s Notebook PC Maintenance and Service Guide © Copyright 2007 Hewlett-Packard Development Company, L. P. AMD, the AMD Arrow logo, and combinations thereof, are trademarks of Advanced Micro Devices, Inc. Bluetooth is a trademark owned by its proprietor and used by Hewlett-Packard Company under license. Intel, Core, Pentium, Celeron are trademarks of Intel Corporation in the United States and other countries. [. . . ] Remove the switch cover (see Switch cover on page 47). Remove the keyboard: 1. Position the computer with the front toward you. 50 Chapter 4 Removal and replacement procedures 2. Remove the two Torx T8M2. 5×7. 0 screws that secure the keyboard to the computer. 3. Lift the rear edge of the keyboard (1) and slide it back until it rests on the display assembly (2). Component replacement procedures 51 6. Release the zero insertion force (ZIF) connector (1) to which the keyboard cable is attached, and disconnect the keyboard cable (2) from the system board. 7. Remove the keyboard. Reverse this procedure to install the keyboard. 52 Chapter 4 Removal and replacement procedures Speaker Description Speaker Spare part number 456593-001 Before removing the speaker, follow these steps: 1. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. Remove the switch cover (see Switch cover on page 47). Remove the speaker: 1. Remove the two Torx T8M2. 5×4. 0 screws (2) that secure the speaker to the top cover. Remove the speaker (3) from the top cover. Reverse this procedure to install the speaker. Component replacement procedures 53 Display lid switch module NOTE: The display lid switch module is included in the Cable Kit, spare part number Cable Kit, spare part number 456594-001. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. Remove the switch cover (see Switch cover on page 47). Remove the display lid switch module: 1. Disconnect the display lid switch module cable (1) from the system board. Remove the display lid switch module (2) from the clip built into the top cover. Remove the display lid switch module cable from the clips (3) built into the top cover. Reverse this procedure to install the display lid switch module. 54 Chapter 4 Removal and replacement procedures Display assembly NOTE: All display assembly spare part kits include 2 WLAN antenna transceivers and cables. Spare part number 456802-001 456801-001 Description 15. 4-inch, WXGA with BrightView 15. 4-inch, WXGA Before removing the display assembly, follow these steps: 1. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. Disconnect the wireless antenna cables from the WLAN module (see WLAN module on page 42). Keyboard (see Keyboard on page 50) Switch cover (see Switch cover on page 47) Speaker (see Speaker on page 53) Display lid switch module (see Display lid switch module on page 54) Remove the display assembly: 1. Disconnect the display panel cables (1) and (2) from the system board. Remove the wireless antenna cables (3) from the clips and routing channels built into the top cover. Component replacement procedures 55 3. 4. Remove the four Torx T8M2. 5×7. 0 screws (1) that secure the display assembly to the computer. Lift the display assembly (2) straight up and remove it. 5. If it is necessary to replace the display bezel, display inverter, or display hinges, remove the eight rubber screw covers (1) and the eight Torx T8M2. 5×6. 0 screws (2) that secure the display bezel to the display assembly. [. . . ] Exercise caution when removing and handling the backlight to avoid damaging this component and causing exposure to the mercury. CAUTION: The procedures in this appendix can result in damage to display components. The only components intended for recycling purposes are the liquid crystal display (LCD) panel and the backlight. This HP product contains mercury in the backlight in the display assembly that might require special handling at end-of-life. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE HP COMPAQ 6720S




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual HP COMPAQ 6720S will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.