User manual HITACHI PJ-TX100

[. . . ] Projector PJ-TX100 User's Manual - Operating Guide Thank you for purchasing this projector. WARNING Before using, read the "User's Manual - Safety Guide" and these manuals to ensure correct usage through understanding. After reading, store them in a safe place for future reference. ENGLISH About this manual Various symbols are used in this manual. WARNING This symbol indicates information that , if ignored, could possibly result in personal injury or even death due to incorrect handling. [. . . ] This function automatically works when a RGB signal with vertical frequency of 50 to 60 Hz is input, and it displays a moving picture more smoothly. memo The "SCART RGB" message means the COMPONENT port is working as a SCART RGB port. Please refer to the item "COMPONENT" in this table. 25 ENGLISH Multifunctional settings SETUP Menu With the SETUP menu, items shown in the table below can be performed. Perform each operation in accordance with the instructions in the table below. Item Description MENU [RGB] PICTURE IMAGE INPUT SETUP SCREEN OPTION EASY MENU KEYSTONE WHISPER IRIS MIRROR :SELECT +0 NORMAL 100 NORMAL KEYSTONE Adjust the Keystone (Vertical) Distortion: Upper in the data Lower in the data memo The adjustable range of this function will vary with the type of input signal. memo When the V:INVERT or the H&V:INVERT is selected under the MIRROR item, if the projector screen is inclined or if the projector is angled downward, this function may not work correctly. memo When the WIDE is selected under the ASPECT item of the IMAGE menu, this adjustment is ignored. memo When the zoom adjustment is set to the TELE side, this correction may be excessive. : NORMAL WHISPER When the WHISPER is selected, acoustic noise and screen brightness are reduced. : NORMAL H:INVERT V:INVERT H&V:INVERT WHISPER IRIS MIRROR 26 Multifunctional settings SCREEN Menu With the SCREEN menu, the items shown in the table below can be performed. Perform each operation in accordance with the instructions in the table below. Item ENGLISH FRANÇAIS MENU [RGB] PICTURE IMAGE INPUT SETUP SCREEN OPTION EASY MENU LANGUAGE MENU POSITION OSD BRIGHT START UP MyScreen MyScreen Lock MESSAGE :SELECT ENGLISH 5 ORIGINAL TURN OFF TURN ON Description Select a menu language using the / buttons. : DEUTSCH ESPAÑOL ITALIANO LANGUAGE NORSK NEDERLANDS SVENSKA PORTUGUÊS SUOMI POLSKI Adjust the menu position using the /// buttons. : Up MENU POSITION Left Right Down To quit the operation, press the "MENU" button or keep no operation for 50 seconds. OSD BRIGHT Select a brightness level of the OSD on the screen using the / buttons. : BRIGHT DARK Select a type of the START UP screen using the / buttons. : MyScreen ORIGINAL TURN OFF The START UP screen is the screen, which is displayed by detecting no signal or an unsuitable signal. The MyScreen is the screen you can register a desired screen, and the ORIGINAL is the existing standard screen. memo The MyScreen and the ORIGINAL Screen will each change to a non-patterned (plain) black color screen several minutes after being displayed. memo About the MyScreen, please refer to the item "MyScreen" in this table. : TURN ON TURN OFF The TURN ON disables the operation of the item "MyScreen" of this SCREEN menu. START UP My Screen My Screen Lock 27 ENGLISH Multifunctional settings SCREEN Menu (continued) Item Description Select the TURN ON or the TURN OFF using the / buttons. : TURN ON TURN OFF When the TURN ON is selected, the following message function works. The message of the "AUTO IN PROGRESS" for the auto adjustment. The message of the "NO INPUT IS DETECTED" The message of the "SYNC IS OUT OF RANGE" The message of the "Detecting . . . " The indication of the input signal by input change. The indication of "IRIS", "BRIGHT", "CONTRAST", "COLOR" by adjusting them. MESSAGE How to register your picture as the MyScreen MyScreen is pointed on the SCREEN menu. [. . . ] Tell the dealer your lamp type number: DT00661 If the projector is mounted on the ceiling, or if the lamp DT00661. 2. In the case of replacement by yourself, After making sure that the projector has cooled adequately, slowly flip over the Lamp cover projector, so that the bottom is facing up. Unscrew the screw (marked by arrow) of the lamp cover, the slide and take the lamp cover up. Unscrew the 2 screws (marked by arrow), and slowly pick up the lamp by the handles. [. . . ]