User manual HITACHI L42VK05U

[. . . ] 42" LCD Colour Television L42VK05U Contents Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] When antenna power option is set as On by pressing " " or " " button, +5V will be transmitted to the antenna output. This feature enables the use of active antenna. Note: Antenna power should be "Off" when standard antenna is used instead of the active antenna. your receiver automatically. and you do not want to interrupt it, disable auto OAD search by performing the following: · Press "MENU" button and using the " " or " " buttons to choose Setup and press the OK button. · Highlight Con guration menu with " " or " " keys and press OK. · Use " " or " " buttons to choose "RECEIVER UPGRADE" and press OK button. · Using the" " or " " button change "Automatic scanning" from Enabled to Disabled. · Highlight "Scan for upgrade" menu with " " or " " keys and pres OK to commence upgrade. · After the search progress is completed, the message " Completed searching for upgrade. No new software was found" appears on the screen if no new software is found. · Do not forget to re enable the automatic OAD function after you have made your recording by repeating the above instructions but this time selecting ENABLE. Note: Your TV may start in First Time Installation mode after OAD update. Scan Encrypted (**) (**) For UK only. Scan Encrypted Channel feature will always be ON after performing rst time installation. When this setting is on, search process will locate the encrypted channels as well. If it is set as OFF manually, encrypted channels will not be located while in automatic search or manual search. Use " " or " " button to select Scan Encrypted and then press " " or " " button to set this setting as On or Off. Receiver Upgrade Over Air Download (OAD) To ensure that your TV always has the most update information, use this setting. each day and searches for any new information which may be broadcast and will download this to Parental Control Use " " or " " buttons to go to Parental Lock option. If it is correct, the Parental Control menu will be displayed: English - 27 - displayed on the screen. Use " " or " " buttons to highlight the Time Zone Setting. Time Zone Setting is set using " " or " " buttons. When AUTO is selected, Current Time and Time Zone options will not be available to be set. If MANUAL option is selected as the Time Zone Setting, Time Zone can be altered: · By pressing " " or " " buttons select Time Zone. Use " " or " " buttons to change the Time Zone between GMT-12 or GMT+12. Current Time on the top of the menu list will then change according to the selected Time Zone. [. . . ] When moving the TV, hold it properly from the bottom part. Sound You can not hear any sound. interrupt the sound, pressing the Sound is coming from only one of the speakers. See Sound Menu. Remote Control Your TV no longer responds to the remote control. If so you can still use the local buttons at the bottom of the TV. Image Persistence Please note that ghosting may occur while displaying a persistent image. [. . . ]