User manual HITACHI L32VK05U

[. . . ] 32" LCD Colour Television L32VK05U Contents Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] · Refer to the module instruction manual for details of the settings. NOTE: Insert or remove the CI module only when the TV is in STAND-BY mode or SWITCHED OFF. You can nd detailed information for all menu items in "Analogue TV Menu System" section. Setup The adjustments in this menu are given as the following: Configuration You can con gure the settings of your TV. Press the RETURN button on the remote control to exit. TV Setup You can use this item to display the TV functions. Press the "MENU" button to display the main menu and use " " or " " button to highlight "TV Setup", press the OK button to display TV Setup menu screen. AC3 Audio (* for EU countries only) In the Con guration Menu, highlight the AC3 Audio item by pressing " " or " " buttons. Use the " " or " " buttons to set the AC3 Audio as On or Off. If the channel that you are watching supports AC3 Audio, turn this setting on. Hard of Hearing (* for EU countries only) Use " " or " " button to select Hard of Hearing and then press " " or " " button to set this setting as On or Off. English - 27 - If the broadcaster enables any special signal concerning the audio, you can set this setting as On to receive such signals. Press " " / " " button to set this function as on or off. Channel List Use " " or " " buttons to go to Channel List option. Use " " or " " buttons to toggle Channel List Mode. If you select "TV Only", with the " " or " " buttons, you navigate through only TV channels. If you select "Radio Only", with the " " or " " buttons, you navigate through only radio channels. If you select "Text Only", with the " " or " " buttons, you navigate through only text channels. To save the recent changes and exit; press the "MENU" button. Active Antenna Use " " or " " buttons to highlight Active Antenna option. When antenna power option is set as On by pressing " " or " " button, +5V will be transmitted to the antenna output. This feature enables the use of active antenna. Note: Antenna power should be "Off" when standard antenna is used instead of the active antenna. your receiver automatically. and you do not want to interrupt it, disable auto OAD search by performing the following: · Press "MENU" button and using the " " or " " buttons to choose Setup and press the OK button. · Highlight Con guration menu with " " or " " keys and press OK. · Use " " or " " buttons to choose "RECEIVER UPGRADE" and press OK button. · Using the" " or " " button change "Automatic scanning" from Enabled to Disabled. · Highlight "Scan for upgrade" menu with " " or " " keys and pres OK to commence upgrade. [. . . ] Also make sure the correct input source has been selected. Tips Screen Care Clean the screen with a slightly damp, soft cloth. Do not use abrasive solvents as they may damage the coating layer of the TV screen. When moving the TV, hold it properly from the bottom part. Sound You can not hear any sound. See Sound Menu. Remote Control Your TV no longer responds to the remote control. [. . . ]