User manual HITACHI CP-X268A

[. . . ] Projector CP-X268A User's Manual ­ Operating Guide Thank you for purchasing this projector. WARNING Before using this product, please read the "User's Manual Safety Guide" and related manuals to ensure the proper use of this product. After reading them, store them in a safe place for future reference. About this manual Various symbols are used in this manual. WARNING This symbol indicates information that, if ignored, could possibly result in personal injury or even death due to incorrect handling. [. . . ] · This function will be unavailable when Transition Detector is on (50). Upper in the data ó Lower in the data · The adjustable range of this function will vary with the type of input signal. · This function will be unavailable when Transition Detector is on (50). NORMAL ó WHISPER · When the WHISPER is selected, acoustic noise and screen brightness are reduced. AUTO KEYSTONE EXECUTE KEYSTONE WHISPER 37 SETUP Menu SETUP Menu (continued) Item Description Using the buttons / switches the mode for mirror status. MIRROR NORMAL ó H:INVERT ó V:INVERT ó H&V:INVERT If Transition Detector is TURN ON and MIRROR status is changed, Transition Detector Alarm (50) will be displayed when projector is restarted after the power switch is turned off. VOLUME Using the buttons / adjusts the volume. Choose a picture input port using the buttons / (1), then select the audio port to be interlocked with the input port using the buttons / (2). () RGB ó RGB ó MIU ó COMPONENT ó S-VIDEO ó VIDEO () ó ó 3 ó ó M M is abbreviation of MIU. AUDIO 38 SCREEN Menu SCREEN Menu With the SCREEN menu, the items shown in the table below can be performed. Select an item using the cursor buttons / on the projector or remote control, and press the cursor button on the projector or remote control, or the ENTER button on the remote control to execute the item. Then perform it referring to the following table. Item Description Using the buttons / switches the OSD (On Screen Display) language. ENGLISH ó FRANÇAIS ó DEUTSCH ó ESPAÑOL ó ITALIANO LANGUAGE NORSK ó NEDERLANDS ó PORTUGUÊS ó ó ó ó SVENSKA ó SUOMI ó POLSKI ó TÜRKÇE MENU POSITION Using the buttons /// adjusts the menu position. To quit the operation, press the MENU button on the remote control or keep no operation for about 0 seconds. The blank screen is a screen for the temporarily blanking feature (24). MyScreen ó ORIGINAL ó BLUE ó WHITE ó BLACK BLANK MyScreen is a screen you can register as a desired screen. BLUE, WHITE and BLACK are non-patterned (plain) screens in each color. · To avoid remaining as an afterimage, the MyScreen and the ORIGINAL screens will change to the BLACK screen after several minutes. · For the MyScreen, please refer to the MyScreen item (40). 39 SCREEN Menu SCREEN Menu (continued) Item Description Using the buttons / switches the mode for the start-up screen. The start-up screen is a screen displayed when no signal or an unsuitable signal is detected. MyScreen ó ORIGINAL ó TURN OFF MyScreen is a screen you can register as a desired screen. The ORIGINAL screen is the existing standard screen. · To avoid remaining as an afterimage, the MyScreen and the ORIGINAL screens will change to the BLANK screen after several minutes. If also the BLANK screen is the MyScreen or ORIGINAL, it will change to the BLACK screen. · This function will be unavailable and fixed to Myscreen when MyScreen Password in the Security Menu is on. This item functions for capturing the MyScreen of the blank screen and the start-up screen. Please execute displaying the input including the picture you want to capture. It will ask you if you start capturing the picture from the current screen. [. . . ] This operation in accordance with the following sometimes resolves your problem. If the situation cannot be corrected, The projector's microprocessor may need to be reset. Please push the Restart switch by using a cocktail stick or similar and the projector will restart. Please use the FACTORY RESET function of the SERVICE item in the OPTION menu (45) to reset all settings to factory default. [. . . ]