User manual HITACHI CP-X4020GF

[. . . ] Projector CP-X4020 User's Manual (detailed) Operating Guide Thank you for purchasing this projector. WARNING Before using this product, please read all manuals for this product. After reading them, store them in a safe place for future reference. About this manual Various symbols are used in this manual. WARNING This symbol indicates information that, if ignored, could possibly result in personal injury or even death due to incorrect handling. [. . . ] The combination of a picture shown on screen and output from the MONITOR OUT port can be arranged in the menu. The picture coming into the port selected in the (2) is output to the MONITOR OUT port while an image from the port chosen in the (1) is on screen. (1) Choose a picture input port using / cursor buttons. COMPUTER IN1 STANDBY VIDEO S-VIDEO COMPONENT (Y, Cb/Pb, Cr/Pr) COMPUTER IN2 STANDBY MODE MONITOR OUT · Choose the STANDBY, to select the output signal from the MONITOR OUT port in the standby state. COMPUTER IN1 OFF Choosing the COMPUTER IN2 allows the following choice. COMPUTER IN2 OFF Choosing other input or the STANDBY allows the following choice. COMPUTER IN1 COMPUTER IN2 OFF · The OFF disables the MONITOR OUT port. 35 AUDIO menu AUDIO menu From the AUDIO menu, items shown in the table below can be performed. Select an item using the / cursor buttons, and press the cursor (or the ENTER) button to execute the item. Then perform it according to the following table. Item VOLUME Using the High Using the SPEAKER / Low / Description cursor buttons adjusts the volume. cursor buttons turns on/off the built-in speaker. ON OFF When the OFF is selected, the built-in speaker does not work. The combination of a picture and audio input port can be arranged in the menu. The audio coming into the port selected in the (2) is output while an image from the port chosen in the (1) is on screen. (1) Choose a picture input port using the / cursor buttons. COMPUTER IN1 COMPUTER IN2 COMPONENT (Y, Cb/Pb, Cr/Pr) AUDIO OUT STANDBY VIDEO S-VIDEO AUDIO SOURCE · Choose the AUDIO OUT STANDBY, to select the audio output to the AUDIO OUT ports in the standby state. · While the RETURN is selected, pressing the cursor (or the ENTER) button returns to the previous menu. (Closed Caption) is automatically activated when is selected and an input signal containing C. C. This function is available only when the signal is NTSC for the VIDEO or the S-VIDEO, or 480i@60 for the COMPONENT, the COMPUTER IN1 or the COMPUTER IN2, and when the AUTO is selected for the DISPLAY in the C. C. menu under the SCREEN menu ( 41). 36 SCREEN menu SCREEN menu From the SCREEN menu, items shown in the table below can be performed. Select an item using the / cursor buttons, and press the cursor (or the ENTER) button to execute the item. Then perform it according to the following table. Item Description Using the / / / cursor buttons switches the OSD (On Screen Display) language. ENGLISH, FRANÇAIS, DEUTSCH, ESPAÑOL. . . (shown in the LANGUAGE dialog) LANGUAGE Press the ENTER (or the INPUT) button to save the language setting. MENU POSITION Using the / / / cursor buttons adjusts the menu position. To quit the operation, press the MENU button on the remote control or keep no operation for about 10 seconds. The blank screen is a screen for the temporarily blanking feature ( 21). [. . . ] Click the model name of your projector first, and then click language you want from the displayed list. CAUTION Windows®: CD drive may produce a loud noise, which in turn MAY RESULT IN EAR AND the CD neither in direct sunlight nor in a high temperature and high humidity environment. NOTE reproduced or republished without notice to our company. 15 ENGLISH Item Product name Liquid Crystal Panel Lamp Speaker Power supply Power consumption Temperature range Size Weight (mass) 400 (W) x 98 (H) x 318 (D) mm approx. D-sub 15 pin mini x1 Video input port Y, Cb/Pb, Cr/Pr (Component video) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]