User manual HITACHI CP-X2520

[. . . ] Projector CP-X2520/CP-X3020 User's Manual (detailed) Operating Guide Thank you for purchasing this projector. WARNING Before using this product, please read all manuals for this product. After reading them, store them in a safe place for future reference. About this manual Various symbols are used in this manual. WARNING This symbol indicates information that, if ignored, could possibly result in personal injury or even death due to incorrect handling. [. . . ] · To avoid remaining as an afterimage, the MyScreen or ORIGINAL screen will change to the plain black screen after several minutes. The start-up screen is a screen displayed when no signal or an unsuitable signal is detected. MyScreen ORIGINAL OFF MyScreen : Screen can be registered by the MyScreen item ( 40). · To avoid remaining as an afterimage, the MyScreen or ORIGINAL screen will change to the BLANK screen ( 23) after several minutes. If also the BLANK screen is the MyScreen or ORIGINAL, the plain black screen is instead used. · When the ON is selected to the MyScreen PASSWORD item in the SECURITY menu ( 51), the START UP is fixed to MyScreen. START UP (continued on next page) 39 SCREEN menu Item Description This item allows you to capture an image for use as a MyScreen image which can be used as the BLANK screen and START UP screen. Display the image you want to capture before executing the following procedure. It will ask you if you start capturing an image from the current screen. Please wait for the target image to be displayed, and press the ENTER or INPUT button when the image is displayed. Please move the frame to the position of the image which you want to use. To start registration, press the ENTER or INPUT button on the remote control. To restore the screen and return to the previous dialog, press the RESET button on the remote control. When the registration is completed, the registered screen and the following message is displayed for several seconds: "MyScreen registration is nished. " If the registration failed, the following message is displayed: "A capturing error has occurred. Please try again. " · This function cannot be selected when the ON is selected to the MyScreen Lock item ( 41). · This function cannot be selected when the ON is selected to the MyScreen PASSWORD item in SECURITY menu ( 51). MyScreen (continued on next page) 40 SCREEN menu Item Description Using the / buttons turns on/off the MyScreen lock function. · This function cannot be selected when the ON is selected to the MyScreen PASSWORD item in SECURITY menu ( 51). "AUTO IN PROGRESS" while automatically adjusting "NO INPUT IS DETECTED" "SYNC IS OUT OF RANGE" "INVALID SCAN FREQ. " "Searching. . . . " while searching for the input "Detecting. . . . " while an input signal is detected The indication of the input signal displayed by changing The indication of the aspect ratio displayed by changing The indication of the PICTURE MODE displayed by changing The indication of the MY MEMORY displayed by changing The indication of "FREEZE" and "II" while freezing the screen by pressing the FREEZE button. · When the OFF is selected, please remember if the picture is frozen. Do not mistake freezing for a malfunction ( 23). MyScreen Lock MESSAGE (continued on next page) 41 SCREEN menu Item Description Each input port for this projector can have a name applied to it. (1) Use the / buttons on the SCREEN menu to select SOURCE NAME and press the or ENTER button. (2) Use the / buttons on the SOURCE NAME menu to select the port to be named and press the button. (3) Select an icon you'd like to assign to the port in the SOURCE NAME dialog. [. . . ] OS:Microsoft® Windows® 98, Windows® 98SE, Windows®: Windows NT®4. 0, Windows® Me, Windows® 2000/Windows® XP or later CPU:Pentium® processor 133MHz / Memory:32MB or more OS:Mac OS® 10. 2 or later Macintosh®: CPU:PowerPC® / Memory:32MB or more CD-ROM drive: 4x CD-ROM drive Display: 256 color / 640x480 dots resolution Applications: Microsoft® Internet Explorer®4. 0 and Adobe® Acrobat® Reader® 4. 0 or later How to use the CD 1. Macintosh®: (1) Double-click on the "Projectors" icon appeared on the desktop screen. (2) When "main. html" file is clicked, Web browser will start and Initial window will appear. Click the model name of your projector first, and then click language you want from the displayed list. [. . . ]