User manual HITACHI CP-RX80

[. . . ] Projector CP-RX80 User's Manual (detailed) Operating Guide Thank you for purchasing this projector. WARNING Before using this product, please read all manuals for this product. After reading them, store them in a safe place for future reference. About this manual Various symbols are used in this manual. WARNING This symbol indicates information that, if ignored, could possibly result in personal injury or even death due to incorrect handling. [. . . ] Select an item using the / cursor buttons, and press the cursor button or ENTER button to execute the item. Then perform it according to the following table. Item Description Using the / / / buttons switches the OSD (On Screen Display) language. ENGLISH FRANÇAIS DEUTSCH ESPAÑOL (shown in the LANGUAGE dialog) LANGUAGE Press the ENTER or INPUT button to save the language setting. To quit the operation, press the MENU button on the remote control or keep no operation for about 10 seconds. The blank screen is a screen for the temporarily blanking feature ( 21). MyScreen ORIGINAL BLUE WHITE BLACK BLANK MyScreen : Screen can be registered by the MyScreen item ( 38). · To avoid remaining as an afterimage, the MyScreen or ORIGINAL screen will change to the plain black screen after several minutes. The start-up screen is a screen displayed when no signal or an unsuitable signal is detected. MyScreen ORIGINAL OFF MyScreen : Screen can be registered by the MyScreen item ( 38). · To avoid remaining as an afterimage, the MyScreen or ORIGINAL screen will change to the BLANK screen ( 21) after several minutes. If also the BLANK screen is the MyScreen or ORIGINAL, the plain black screen is instead used. · When the ON is selected to the MyScreen PASSWORD item in the SECURITY menu ( 48), the START UP is fixed to MyScreen. START UP (continued on next page) 37 SCREEN menu Item Description This item allows you to capture an image for use as a MyScreen image which can be used as the BLANK screen and START UP screen. Display the image you want to capture before executing the following procedure. It will ask you if you start capturing an image from the current screen. Please wait for the target image to be displayed, and press the ENTER or INPUT button when the image is displayed. Please move the frame to the position of the image which you want to use. To start registration, press the ENTER or INPUT button on the remote control. To restore the screen and return to the previous dialog, press the RESET button on the remote control. When the registration is completed, the registered screen and the following message is displayed for several seconds: "MyScreen registration is finished. " If the registration failed, the following message is displayed: "A capturing error has occurred. Please try again. " · This function cannot be selected when the ON is selected to the MyScreen Lock item ( 39). · This function cannot be selected when the ON is selected to the MyScreen PASSWORD item in SECURITY menu ( 48). MyScreen (continued on next page) 38 SCREEN menu Item Description Using the / buttons turns on/off the MyScreen lock function. · This function cannot be selected when the ON is selected to the MyScreen PASSWORD item in SECURITY menu ( 48). [. . . ] (approximately) Specification Ports Optional parts 317mm 98mm 113mm 16 288mm Troubleshooting - Warranty and after-service If an abnormal operation (such as smoke, strange odor or excessive sound) should occur, stop using the projector immediately. Otherwise if a problem occurs with the projector, first refer to the "Troubleshooting" of the "Operating Guide" in the CD and run through the suggested checks. If this does not resolve the problem, please consult your dealer or service company. Please check the following web address where you may find the latest information for this projector. http://www. hitachi. us/digitalmedia or http://www. hitachidigitalmedia. com NOTE · The information in this manual is subject to change without notice. [. . . ]