User manual HITACHI CP-RX70WF
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual HITACHI CP-RX70WF. We hope that this HITACHI CP-RX70WF user guide will be useful to you.
You may also download the following manuals related to this product:
HITACHI CP-RX70WF (1126 ko)
HITACHI CP-RX70WF (1083 ko)
HITACHI CP-RX70WF (1091 ko)
HITACHI CP-RX70WF (1135 ko)
HITACHI CP-RX70WF (1098 ko)
HITACHI CP-RX70WF (1105 ko)
HITACHI CP-RX70WF (1509 ko)
HITACHI CP-RX70WF (1156 ko)
HITACHI CP-RX70WF (1311 ko)
HITACHI CP-RX70WF (2022 ko)
HITACHI CP-RX70WF (1128 ko)
HITACHI CP-RX70WF (1131 ko)
HITACHI CP-RX70WF (1140 ko)
Manual abstract: user guide HITACHI CP-RX70WF
Detailed instructions for use are in the User's Guide.
[. . . ] Projector
CP-RX70
User's Manual (detailed) Operating Guide
Thank you for purchasing this projector. WARNING
WARNING CAUTION
NOTE
Trademark acknowledgment
1
Read this Safety Guide first.
Projector
User's Manual - Safety Guide
Thank you for purchasing this projector.
WARNING · Before using, read these user's manuals of this projector to ensure correct usage through understanding. Incorrect handling of this product could possibly result in personal injury or physical damage. The manufacturer assumes no responsibility for any damage caused by mishandling that is beyond normal usage defined in these manuals of this projector. [. . . ] Do not place the projector, the remote control and other parts in direct sunlight or near a hot object such as heater, etc.
Avoid Magnetism.
Manufacture strongly recommends to avoid any magnetic contact that is not shielded or protected on or near the projector itself. Magnetic Security Devices, or other projector accessory that contains magnetic material that has not been provided by the manufacture etc. ) Magnetic objects may cause interruption of the projector's internal mechanical performance which may interfere with cooling fans speed or stopping, and may cause the projector to completely shut down. 5
Safety Precautions (continued)
CAUTION
Remove the power cord for complete separation.
· For safety purposes, disconnect the power cord if the projector is not to be used for prolonged periods of time. Neglect could result in fire or electrical shock.
Disconnect the plug from the power outlet.
Ask your dealer to cleaning inside of the projector about every year.
Accumulations of dust inside the projector cause result in fire or malfunction. Cleaning inside is more effective if performed before every humid periods such as rainy season. · This product isn't designed for continuous use of long time. In the case of continuous use for 6 hours or more, or use for 6 hours or more every day (even if it isn't continuous), or repetitious use, the lifetime may be shortened, and these parts may need to be replaced even if one year has not passed since the beginning of using. · Any inclining use beyond the adjustment range explained in these user's manuals may shorten the lifetimes of the consumables.
Before turning on the power, make the projector cool down adequately.
After turning the projector off, pushing the restart switch or interrupting of the power supply, make the projector cool down adequately. Operation in a high temperature state of the projector causes a damage of the electrode and un-lighting of the lamp.
Avoid strong rays.
Any strong ray (such as direct rays of the sun or room lighting) onto the remote control sensors could invalidate the remote control.
Avoid radio interference.
Any interfering radiation could cause disordered image or noises. · Avoid radio generator such as a mobile telephone, transceiver, etc. around the projector.
About displaying characteristic.
The display condition of the projector (such as color, contrast, etc. ) depends on characteristic of the screen, because the projector uses a liquid crystal display panel. It can cause red image.
Turn the power on/off in right order.
To prevent any trouble, turn on/off the projector in right order mentioned below unless specifying. · Power on the projector before the computer or video tape recorder. · Power off the projector after the computer or video tape recorder.
Take care not to fatigue your eyes.
Rest the eyes periodically.
Set the sound volume at a suitable level to avoid bothering other people.
· It is better to keep the volume level low and close the windows at night to protect the neighborhood environment.
Connecting with notebook computer
When connecting with notebook computer, set to valid the RGB external image output (setting CRT display or simultaneous display of LCD and CRT). Please read instruction manual of the notebook for more information.
7
Lamp
WARNING
HIGH VOLTAGE HIGH TEMPERATURE HIGH PRESSURE
The projector uses a high-pressure mercury glass lamp. The lamp can break with a loud bang, or burn out, if jolted or scratched, handled while hot, or worn over time. Note that each lamp has a different lifetime, and some may burst or burn out soon after you start using them. In addition, when the bulb bursts, it is possible for shards of glass to fly into the lamp housing, and for gas containing mercury to escape from the projector's vent holes. About disposal of a lamp · This product contains a mercury lamp; do not put in trash. (in USA) For product disposal, contact your local government agency or www. eiae. org (in the US) or www. epsc. ca (in Canada). · If the lamp should break (it will make a loud bang when it does), unplug the power cord from the outlet, and make sure to request a replacement lamp from your local dealer. Note that shards of glass could damage the projector's internals, or cause injury during handling, so please do not try to clean the projector or replace the lamp yourself. [. . . ] A certain error has been detected.
The lamp does not light, and there is a possibility that interior portion has become heated.
Blinking In Red or Red
Red
off
Blinking In Red or Red
Blinking In Red
off
The cooling fan is not operating.
Blinking In Red or Red Blinking In Red
off
50
Troubleshooting
Regarding the indicator lamps (continued)
POWER LAMP TEMP indicator indicator indicator Description
There is a possibility that the interior portion has become heated.
Blinking In Red or Red
off
Red
Green
blinking in Red
There is a possibility that the interior portion has become overcooled.
Green blinking in Red
NOTE
Shutting the projector down
13
COMPUTER IN1 COMPUTER IN2
Resetting all settings
40 51
Troubleshooting
Phenomena that may be easy to be mistaken for machine defects
Phenomenon
Cases not involving a machine defect
Reference page 10
The electrical power cord is not plugged in. The main power source has been interrupted during operation such as by a power outage (blackout), etc.
Either there is no lamp and/or lamp cover, or either
45
The signal cables are not correctly connected. Signal source does not correctly work.
8
The input changeover settings are mismatched. The MUTE function is working.
14 8
14
The AUDIO setting is not correct. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE HITACHI CP-RX70WF
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual HITACHI CP-RX70WF will begin.