User manual HITACHI CP-DW10N

[. . . ] Projector CP-DW10N User's Manual (detailed) Operating Guide Thank you for purchasing this projector. WARNINGBefore using this product, please read all manuals for this product. After reading them, store them in a safe place for future reference. About this manual Various symbols are used in this manual. WARNING This symbol indicates information that, if ignored, could possibly result in personal injury or even death due to incorrect handling. [. . . ] 41 START UP (continued on next page) SCREEN menu Item Description This item allows you to capture an image for use as a MyScreen image which can be used as the BLANK screen and the START UP screen. Display the image you want to capture before executing the following procedure. It will ask you if you start capturing an image from the current screen. Please wait for the target image to be displayed, and press the ENTER (or the INPUT) button when the image is displayed. To stop performing, press the RESET (or press the cursor and the INPUT buttons at the same time) button. Please move the frame to the position of the image which you want to use. To start registration, press the ENTER (or the INPUT) button on the remote control. To restore the screen and return to the previous dialog, press the RESET (or press the cursor and the INPUT buttons at the same time) button. When the registration is completed, the registered screen and the following message is displayed for several seconds: "MyScreen registration is finished. " If the registration failed, the following message is displayed: "A capturing error has occurred. Please try again. " · This function cannot be selected when the ON is selected to the MyScreen Lock item ( 43). · This function cannot be selected when the ON is selected to the MyScreen PASSWORD item in the SECURITY menu ( 61). · This item cannot be selected for an HDMI signal. MyScreen (continued on next page) 42 SCREEN menu Item Description Using the / cursor buttons turns on/off the MyScreen lock function. · This function cannot be selected when the ON is selected to the MyScreen PASSWORD item in the SECURITY menu ( 61). "AUTO IN PROGRESS" while automatically adjusting "NO INPUT IS DETECTED" "SYNC IS OUT OF RANGE" "INVALID SCAN FREQ. " "NOT AVAILABLE" "Searching. . . . " while searching for the input "Detecting. . . . " while an input signal is detected The indication of the input signal displayed by changing The indication of the aspect ratio displayed by changing The indication of the PICTURE MODE displayed by changing The indication of the MY MEMORY displayed by changing The indication of "FREEZE" and "II" while freezing the screen by pressing the FREEZE button. · When the OFF is selected, please remember if the picture is frozen. Do not mistake freezing for a malfunction ( 24). MyScreen Lock MESSAGE (continued on next page) 43 SCREEN menu Item Description Each input port for this projector can have a name applied to it. (1) Use the / cursor buttons on the SCREEN menu to select the SOURCE NAME and press the cursor (or the ENTER) button. (2) Use the / cursor buttons on the SOURCE NAME menu to select the port to be named and press the cursor button. Use the /// cursor buttons and the ENTER (or the INPUT) button to select and enter characters. To erase 1 character at one time, press the RESET (or press the cursor and the INPUT buttons at the same time) button. Also if you move the cursor to the DELETE or the ALL CLEAR on screen and press the ENTER (or the INPUT) button, 1 character or all characters will be erased. (4) To change an already inserted character, press the cursor button to move the cursor to the first line, and use the / cursor buttons to move the cursor on the character to be changed. [. . . ] Select NETWORK BRIDGE for COMMUNICATION TYPE item in the OPTION - SERVICE - COMMUNICATION menu. Check the status of the POWER, TEMP, LAMP indicators on the control panel of the projector and take countermeasures referring to the table on page 73 and 74. Please release the security lock. 39 52 Network does not work. 78 39 52 39 73, 74 60 Troubleshooting Phenomena that may be easy to be mistaken for machine defects (continued) Phenomenon Cases not involving a machine defect The lamp is turned off. [. . . ]