Detailed instructions for use are in the User's Guide.
[. . . ] GV6025/6650
USER'S GUIDE
SSC-GV6025/6650
GV6025/6650
User's Guide
Go-Video/Sensory Science
7835 East McClain Drive Scottsdale, Arizona USA 85260 www. sensoryscience. com www. govideo. com
WARNING:
To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. This video cassette recorder should only be used with 120V, 60Hz (standard U. S. Federal law provides severe civil and criminal penalties for the unauthorized reproduction, distribution, or exhibition of copyrighted motion pictures and videotapes. (Title 17, United States Code, Sections 501 and 506).
CAUTION:
To prevent fire, shock hazard, or annoying interference, use only the recommended accessories. [. . . ] · Simulcast -- Sometimes a broadcaster will transmit a television program and an FM radio broadcast of the same program simultaneously. When Tuner Audio is set to Simulcast, the audio signal will come from the front line inputs, usually connected to a stereo system. Simulcasts are usually reserved for live musical performances; however, they are becoming less frequent because most televisions have built-in stereo sound.
TUNER AND CHANNEL LIST CH ## Tuner Band Auto Auto Channel Search Add Channel Remove Channel Show Weak Channels No Tuner Audio Stereo ____________________________________ / = Move = Sel MENU=Quit
Stereo Mono SAP TV + SAP Simulcast
GV6650
TUNER AND CHANNEL LIST
35
36
GV6025/6650 USER'S GUIDE
5 - Copy Features Basic Copying
To copy a tape, simply put your source tape in Deck 1, your blank tape in Deck 2, and press Copy Tape. The tape in Deck 1 will begin copying to Deck 2.
1 2 3
Insert Source Tape
Deck
Put the tape you wish to copy in Deck 1.
Power Copy Tape
Insert Target Tape
Put your blank tape in Deck 2.
GV6025
Deck Select Stop / Eject Rewind
Deck
Play
F. Forward
Pause
Record
Copy Your Tape
Press the Copy Tape button on either the remote control or the front of the VCR. · To Stop copying, press Stop/Eject on both decks; see Sync Editing on page 66.
Deck
POWER DISPLAY Set CLOCK Set TIMER
COPY TAPE
Copy
Tape
CLEAR
Deck
SEARCH/IDX VIEW
CLK/CTR
Play F. Forward Pause Record
COPY FEATURES
37
EZ Copy
EZ-Copy automates the entire copy process so you can copy an entire tape at the touch of a button. Just press the Copy Tape button, and the VCR will rewind both decks completely, copy the source tape to the target tape, rewind both decks again and eject the tapes.
1 2
Open "Main Menu"
Press the Menu button on the remote control.
DECK 1
PLAY
STILL/FRAME
RE W
MENU
FF
DECK 2
STOP/EJ.
REC/OTR
SHUTTLE
EDIT/TITLE SP/EP
MAIN MENU 1 EZ Copy Off 2 : Child Lock Off 3 : 8-Scene Edit List 4 : Setup Titler Message 5 : Language/Langue/Idioma ____________________________________ / To Move To Select MENU to Quit Hold MENU Key For Setup
TRACKING
REPEAT
SKIP
Set "EZ Copy"
Press 1 repeatedly to turn EZ Copy on or off: · On -- When Copy Tape is pressed, both decks will rewind, the tape in Deck 1 will be copied to Deck 2, both decks will rewind again, and the tapes will be ejected. · Off -- When Copy Tape is pressed, the tape in Deck 1 will begin copying to Deck 2 immediately from the current position of both decks. Note: If the target tape ends before the source tape, neither tape will rewind to alert you that a problem occurred.
1 SLOW 4
2
3 VCR
5
6 TV
7
8 0
9 TV/VCR
100+
VOL
CH
GV6025/6650
Complete Program Record When EZ Copy is selected, the VCR begins copying at the same speed as the source tape; it then calculates how much time is remaining on the target tape and adjusts the copy speed to EP if necessary to copy the entire tape. If there is not enough room to copy the entire source tape, the VCR will copy in EP until the end of the target tape is reached.
PREV. CH/ MUTE INPUT SEL
MAIN MENU 1 EZ Copy Off 2 : Child Lock Off 3 : 8-Scene Edit List 4 : Setup Titler Message 5 : Language/Langue/Idioma ____________________________________ / To Move To Select MENU to Quit Hold MENU Key For Setup
Off On
38
GV6025/6650 USER'S GUIDE
Copy Mode
There are two methods of copying a tape from Deck 1 to Deck 2: HQ1 (High Quality 1) and HQ2 (High Quality 2). The Auto setting will make this choice for you.
1 2 3
Open "Setup Menu"
Press and hold the Menu button for 3 seconds.
DECK 1
PLAY
STILL/FRAME
RE W
MENU
FF
SETUP MENU 1 Copy/Record Settings 2 : Tuner And Channel List 3 : Dual-Deck Features
REC/OTR
DECK 2
STOP/EJ.
SHUTTLE
EDIT/TITLE SP/EP
____________________________________ To Select / To Move MENU to Quit
TRACKING
REPEAT
SKIP
Select "Copy/Record Settings"
Press 1.
1 SLOW 4
2
3 VCR
5
6 TV
7
8 0
9 TV/VCR
100+
VOL
CH
GV6025/6650
PREV. CH/ MUTE INPUT SEL
COPY AND RECORD SETTINGS 1 Copy Mode Auto 2 : Speed Matching On 3 : Copy Audio Insert Off 4 : Date/Time Stamp Timer 5 : Deck1 Rec Source Auto 6 : Deck2 Rec Source Auto 7 : Record Mode Normal ____________________________________ / = Move = Sel MENU=Quit
Set "Copy Mode"
Press 1 repeatedly to set Copy Mode to: · Auto -- Automatically sets the Copy Mode. Best if source tape is in LP or EP.
1 SLOW 4
2
3 VCR
5
6 TV
7
8 0
9 TV/VCR
100+
VOL
CH
GV6025/6650
PREV. CH/ MUTE INPUT SEL
COPY AND RECORD SETTINGS 1 Copy Mode Auto 2 : Speed Matching On 3 : Copy Audio Insert Off 4 : Date/Time Stamp Timer 5 : Deck1 Rec Source Auto 6 : Deck2 Rec Source Auto 7 : Record Mode Normal ____________________________________ / = Move = Sel MENU=Quit
Auto HQ1 HQ2
COPY FEATURES
39
Speed Matching
Speed Matching automatically sets the Deck 2 record speed to be the same as the Deck 1 playback speed when copying a tape. You must disable this feature to copy multiple movies onto a single blank tape.
1 2 3
Open "Setup Menu"
Press and hold the Menu button for 3 seconds.
DECK 1
PLAY
STILL/FRAME
RE W
MENU
FF
SETUP MENU 1 Copy/Record Settings 2 : Tuner And Channel List 3 : Dual-Deck Features
REC/OTR
DECK 2
STOP/EJ.
SHUTTLE
EDIT/TITLE SP/EP
____________________________________ To Select / To Move MENU to Quit
TRACKING
REPEAT
SKIP
Select "Copy/Record Settings"
Press 1.
1 SLOW 4
2
3 VCR
5
6 TV
7
8 0
9 TV/VCR
100+
VOL
CH
GV6025/6650
PREV. CH/ MUTE INPUT SEL
COPY AND RECORD SETTINGS 1 Copy Mode Auto 2 : Speed Matching On 3 : Copy Audio Insert Off 4 : Date/Time Stamp Timer 5 : Deck1 Rec Source Auto 6 : Deck2 Rec Source Auto 7 : Record Mode Normal ____________________________________ / = Move = Sel MENU=Quit
Set "Speed Matching"
Press 2 repeatedly to turn Speed Matching on or off. Turn Speed Matching off only if you want to record two or three SP tapes onto one EP tape. If you do this, you will need to set the Record Speed manually using the SP/EP button on the remote control.
1 SLOW 4
2
3 VCR
5
6 TV
7
8 0
9 TV/VCR
100+
VOL
CH
GV6025/6650
PREV. CH/ MUTE INPUT SEL
COPY AND RECORD SETTINGS 1 : Copy Mode Auto 2 Speed Matching On 3 : Copy Audio Insert Off 4 : Date/Time Stamp Timer 5 : Deck1 Rec Source Auto 6 : Deck2 Rec Source Auto 7 : Record Mode Normal ____________________________________ / = Move = Sel MENU=Quit
On Off
40
GV6025/6650 USER'S GUIDE
Copy Audio Insert
You can insert a new audio track, such as music or voiceovers, while you are copying a tape. The audio track will be inserted in place of the original audio track on the source tape.
1 2 3
Open "Setup Menu"
Press and hold the Menu button for 3 seconds.
DECK 1
PLAY
STILL/FRAME
RE W
MENU
FF
SETUP MENU 1 Copy/Record Settings 2 : Tuner And Channel List 3 : Dual-Deck Features
REC/OTR
DECK 2
STOP/EJ.
SHUTTLE
EDIT/TITLE SP/EP
____________________________________ To Select / To Move MENU to Quit
TRACKING
REPEAT
SKIP
Select "Copy/Record Settings"
Press 1.
1 SLOW 4
2
3 VCR
5
6 TV
7
8 0
9 TV/VCR
100+
VOL
CH
GV6025/6650
PREV. [. . . ] · Double-check your antenna connections or tuner settings.
Why is my Power button blinking?
The VCR is in Auto Power Off mode. If you press the Power button while rewinding, copying, Timer Recording, One-Touch Recording or using EZ-Copy, the VCR will automatically turn off when the function is completed. Pressing the Power button toggles Auto Power On and Off.
88
GV6025/6650 USER'S GUIDE
Why is "Copy" blinking on the front panel?
The Copy Tape procedure is in Pause mode. See Sync Editing on page 66.
Why do I lose stereo sound when I turn on my VCR? [. . . ]