User manual GAS GAS SM 2005

[. . . ] MANUAL DEL USUARIO SERVICE MANUAL MANUEL D'ENTRETIEN LIBRETTO USO E MANUTENZIONE Foreword GAS GAS thanks you for the trust you have placed in us. By choosing the new GAS GAS EC / MC / SM 2005 you have become part of the great GAS GAS family and, as a user of the number one manufacturer of off-road motorbikes, you deserve the distinguished treatment that we wish to offer to you both in our after-sale relationship and in the explanations that we provide in this manual. Our EC / MC / SM 2005 is a motorcycle conceived for the practice of high-competition. It is actually the fruit of many years of competition and experimentation in this demanding discipline, as well as the many great successes achieved thanks to great trial riders who have contributed with their expertise to the basic data that have allowed us to create motorcycles of the highest level, GAS GAS unique motorcycles which count on important key factors: reliability, high features and a good stability. [. . . ] - At this time, the fork oil pours out of the hydraulic rod hole, keep it raised to let it drain until it stops. - Tighten the suspension spring and insert the wrench (5) in the locknut (2) to lock the cap (3). - Install the suspension cap (3) in the fork tube and tighten it to 29 Nm. - Install the parts removed. EC / MC / SM 2005 -98- Shock absorber extension adjustment To adjust, turn by hand the extension adjuster in the lower part of the shock absorber until a "click" is heard. Rebound adjustment standard measures: Between 18 and 25 "CLICKS" (Counterclockwise from fully closed position). (1) (1). Extension adjuster. Low compression adjustment The rear suspension is composed of the shock absorber, swingarm, linkages and torque rod. Generally speaking, the operating characteristics are similar to the front fork. But its unique characteristic is that it has, besides the shock absorber, an articulated quadrilateral composed of the linkages and torque rod. To match various riding condition types, the shock absorber spring can be adjusted or replaced with an optional one. Also the dampening force can be easily adjusted, this feature makes it unnecessary to change oil viscosity. To adjust, turn the fuel tank control with a screwdriver until you hear a "click". The total number of possible positions is: 30 "CLICKS" Rebound adjustment standard measures: 15 "CLICKS" (Counterclockwise from fully closed position). As the control is closed the compression will be harder, on the other EC / MC / SM 2005 -99- hand as it is opened it will be softer. Low and high compression adjuster. Suspension spring The standard spring is 4, 0. The spring length preloaded with the shock absorber at rest is 258 mm. (A) (A) (C) Spring adjustment - Remove the seat and side covers. - After adjustment, move the spring up and down to make sure that the spring is fully seated. Rear shock absorber spring replacement Harder and softer springs are available. If the standard spring is not adequate for your purpose, select a proper one according to the rider´s weight and the road conditions. NOTE Refer to the suspension adjustments on page 110. (B) (A) (A). Air cleaner box. EC / MC / SM 2005 -100- WARNING Improper installation of the rear shock absorber spring may cause the spring and any of its related parts to be ejected at high velocity. The installation of these parts should be performed by an authorized dealer. - Adjust the tire pressure to match road conditions and rider's preference, but do not stray too far from the recommended pressure. [. . . ] If the last day of this period is a Sunday or an official holiday, the Warranty period will be extended such that the last day of the period covered will be the first working day after the Sunday or official holiday. Those claims under Warranty for defects not brought to the attention of a GG authorised dealer before the end of the Warranty Period will be excluded. Obligation of the purchaser GG will have the right to reject any claims under Warranty in the event that: a) The purchaser has failed to submit the vehicle to any of the inspections and/or maintenance work required in the Users' Manual, or has exceeded the date set for such inspections or maintenance work. Also excluded from guarantee are those faults that appeared prior to the dates established for an inspection or maintenance work where the latter was not carried out, or was carried out later than the date established. [. . . ]