User manual FURUNO FELCOM 70
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual FURUNO FELCOM 70. We hope that this FURUNO FELCOM 70 user guide will be useful to you.
Manual abstract: user guide FURUNO FELCOM 70
Detailed instructions for use are in the User's Guide.
[. . . ] INMARSAT FLEET F77 SHIP EARTH STATION
FELCOM 70
Your Local Agent/Dealer 9-52 Ashihara-cho, Nishinomiya, Japan Telephone : fax : 0798-65-2111 0798-65-4200
All rights reserved.
Printed in Japan
FIRST EDITION : FEB. OME-56340 ( TATA ) FELCOM70
*00014766300* *00014766300*
*00014766300*
*OME56340A00* *OME56340A00*
*OME56340A00*
SAFETY INSTRUCTIONS
WARNING
ELECTRICAL SHOCK HAZARD
Do not open the equipment. Do not approach the radome closer than 4 meters when it is transmitting. The radome emits radio waves which can be harmful to the human body, particularly the eyes. [. . . ] CONFIGURATION FROM PC
5. 14
Saving and reloading configurations
The FELCOM 70 configuration settings may be stored on the PC hard disk, e. g. 2 Clicking Devices > Save config to a file automatically stores the data in a "Config. cgf" file in the vtLite directory c:/program files/vtLite Marine. 3 After installing the software, the settings may be transferred back to FELCOM 70 by pressing Load. 4 Clicking Restore Factory Defaults loads default FELCOM 70 configurations. Printout/storing a configuration summary: 5 Clicking Print Summary opens the Printout Viewer (see next page) which lists the settings of the end user equipment, and allows filing and/or printout. Setting such as Net provider / Access codes / ISDN protocol / Rx-L band output are not saved. Phone book data and traffic log must be saved in the Book and Log menus.
5-31
5. CONFIGURATION FROM PC
Configuration printout viewer
The list is sorted by Terminal Id.
Print to local printer Save to disk Terminal ld and MSN number Tyep of service Individual device settings Distress Alarm, if attached
Name/location, if entered
5-32
5. CONFIGURATION FROM PC
5. 15
Print handling setup
Clicking Configure>Print handling opens the Printout from modem window. The Printout from modem window is used for setting of default output of Traffic log, Modem configuration, etc. Default print action: Normally, choose Print to screen which causes the file to be output via the Printout viewer. Print to screen settings: Determines the output of records via the Printout viewer. Normally, use Concatenate print jobs which "chains" the jobs to be printed or saved to file. Printer settings: For hardcopy printout, make sure that the appropriate printer and font are selected.
5-33
5. CONFIGURATION FROM PC
This page is intentionally left blank.
5-34
6.
6. 1
6. 1. 1
DATA COMMUNICATION
Mobile Packet Data Service (RS-232)
Introduction
The Mobile Packet Data Service complies with the communication protocol defined by the Inmarsat F77 system. The transmission data rate over the satellite link is typically 20 kbps (a 64 kbps channel is shared with other users). With MPDS you only pay for the amount of data received or transmitted, rather than for the time you are connected. MPDS can be efficient for applications that involves brief bursts of communication followed by periods of inactivity, such as: · E-mail
· Internet/intranet · Navigational updates · Scada · Database queries · E-commerce · VPN - Virtual Private Network
Land Earth Station, LES FELCOM 70 R LES
PC w/Windows 2000 or later
SBS (Shared Base Station) assigns channels to the MPDS user and handles the MPDS communication. Home LES (Home Land Earth Station) gives access to MPDS service like Internet/e-mail. It also handles the MPDS biling system.
SBS
Home LES
Internet
System Overview
6-1
6. DATA COMMUNICATION
6. 1. 2
Connecting up
Installation Connect the RS-232 serial cable between the serial port on the PC and the RS-232 port on the CU. [. . . ] Call announcement from mobile to fixed: The MES uses the Return Identity (RTNID) to communicate with the LES. The attached equipment dials the number and transmits its MSN number to the MES. LES checks that the RTNID is commissioned before connecting the call to the fixed net.
Calls from Mobiles
Call announcement
LES Return ID Service 2 ABCDEF 4. 8kbps speech
Fixed net 004767244700 number
67244700 PSTN 00 47 67 24 47 00
$" $ & #
+
8
5
LES
MSN Service 20 60 61 48 0 4. 8 kbps speech 64 kbps data (Gr. 4 fax) 64 kbps data 64 kbps data (Gr. 3 fax) 4. 8 kbps speech
Term. Id
1 51 52 61 91
When the MES originates a call it starts by sending a request to the LES. This initial request for service contains the MES Return ID and type of service. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE FURUNO FELCOM 70
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual FURUNO FELCOM 70 will begin.