Detailed instructions for use are in the User's Guide.
[. . . ] Fire or electrical shock can result if the power is left on.
CU-300
CAUTION
Observe the following compass safe distances to prevent interference to a magnetic compass:
Standard compass Steering compass
0. 70 m
0. 45 m
Attach grounding securely to ship's body. The grounding is required to prevent electrical shock.
ii
TABLE OF CONTENTS
SYSTEM CONFIGURATIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iv EQUIPMENT LISTS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . MOUNTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] SP-1 PACKING LISTS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1 OUTLINE DRAWINGS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-1
iii
SYSTEM CONFIGURATIONS
The Memory Card Interface Unit CU-300 connects to a processor unit of MODEL18x4C-BB/ 19x4C-BB or GD-1920C-BB (NavNet VX2-BB) to provide a card drive(s) in a remote location(s). Note that the CU-300 can be connected only to the NavNet VX2 units which have the following software version No. C-MAP specification
Type MODEL 18x4C-BB/19x4C-BB, GD-1920C-BB MODEL 18x4C/19x4C, GD-1920C MODEL 17x4C, GD-1720C Version No. 1950026-02. 01 and after 1950024-02. 01 and after 1950028-02. 01 and after
NAVIONICS specification
Type MODEL 18x4C-BB/19x4C-BB, GD-1920C-BB MODEL 18x4C/19x4C, GD-1920C MODEL 17x4C, GD-1720C Version No. 1950025-01. 09 and after 1950023-01. 09 and after 1950027-01. 09 and after
iv
Connection to single NavNet VX2-BB unit
CU-300
Power cable MJ-A3SPF0026-050C or 100C
Model 18x4C-BB/19x4C-BB GD-1920C-BB
Ethernet cable MJ-A6SPF0017-050C or 100C
Connection to multiple NavNet VX2-BB units
CU-300
Power cable MJ-A3SPF0026-050C or 100C
Model 18x4C-BB/19x4C-BB GD-1920C-BB
LAN cable (CAT5, STP, straight)
Model 18x4C-BB/19x4C-BB, GD-1920C-BB, Model 18x4C/19x4C, GD-1920C Model 17x4C or GD-1720C
Model 18x4C-BB/19x4C-BB, GD-1920C-BB, Model 18x4C/19x4C, GD-1920C Model 17x4C or GD-1720C : Standard supply : Local supply : NavNet VX2 : Option for NavNet VX2
HUB
v
Connection for two CU-300
Model 18x4C-BB/19x4C-BB GD-1920C-BB
Model 18x4C-BB/19x4C-BB GD-1920C-BB
CU-300
Power cable MJ-A3SPF0026-050C or 100C
CU-300
LAN cable (CAT5, STP, straight)
HUB
: Standard supply : Local supply : NavNet VX2 : Option for NavNet VX2
vi
EQUIPMENT LISTS
Standard supply
Name Memory Card Interface Unit Installation Materials (Select one. ) Type CU-300 CP03-27400 Code No. 000-081-570 Qty 1 1 set For 5 m, MJ-A6SPF0017-050C, MJ-A3SPF0026-050C, and CP03-27401 For 10 m, MJ-A6SPF0017100C, MJ-A3SPF0026-100C, and CP03-27401 For 5 m, MJ-A3SPF0026-050C and CP03-27401 For 10 m, MJ-A3SPF0026-100C and CP03-27401 Remarks
CP03-27410
000-081-571
1 set
CP03-27440 CP03-27450
000-083-403 000-010-245
1 set 1 set
Optional supply
Name Hanger Console Mounting Kit Cable Assy Type FP03-10201 FP03-10203 MJ-A3SPF0026-050C MJ-A3SPF0026-100C MJ-A6SPF0017-050C MJ-A6SPF0017-100C Code No. 008-539-530 001-011-710 000-157-944-10 000-157-945-10 000-159-705-11 000-159-706-11 Qty 1 set 1 set 1 1 1 1 Remarks For desktop mounting For bulkhead mounitng 5 m, power cable 10 m, power cable 5 m, Ethernet cable 10 m, Ethernet cable
vii
1.
MOUNTING
The memory card interface unit can be flush mounted in a console, or mountd on a desktop or the overhead. Choose a mounting location for the unit considering the following points: · Leave sufficient space around the unit to facilitate checking and maintenance. See outline drawing at the back of this manual for recommended maintenance space. · Locate the unit well away from exhaust gases and other active gases. Note: For flush mount or bulkhead mount, the DIP switch setting should be completed before mounting. Prepare a cutout in the mounting location as below.
150. 5+0. 5
54+1
. 2
5
24+0. 5
143+1
2. Screw four threaded rod (M4×50, supplied) into holes on the front panel (reverse side).
Screw threaded rods into these holes.
R2
4. 5
Rear view
Threaded rod
3. nut
198 42 171 20 145
#100
60
1. 2
Desktop Mounting
This method requires the optional hanger FP03-10201. Name: Hanger (Type: FP03-10201, Code no. : 008-539-530) Contents of kit FP03-10201
Name Hanger Self-tapping screw Pan head screw Type 19-023-3081 Code No. 100-316-250 000-162-608-10 000-163-167-10 Qty 1 4 4
5×20, SUS304
M4×10, C2700W
1. [. . . ] · Connection between one memory card interface unit and multiple processor units · Connection between two memory card interface units and two processor units. Note that the total number of card slots is maximum four in a series.
2. 1
Connection between One Processor Unit and One Memory Card Interface Unit
Ethernet cable MJ-A6SPF0017-050C or 100C
POWER
1
F. G. 3
REMOTE FMD DISPLAY
0. 3 A MAX
2 GND
OUTPUT 12 VDC
NTSC/PAL
RGB OUT
DJ-1
OPTION
1
2
CARD SLOT
3 GND
INPUT 12-24 VDC
NETWORK
CONT
DATA 3
DATA 2
DATA 1
Power cable MJ-A3SPF0026-050C or 100C
Ground wire IV-1. 25sq (Local supply)
Ground
5
2. 2
Connection between One Memory Card Interface Unit and Multiple Processor Units (Max. Three Units)
Prepare the following cables and connectors: · Commercial LAN cable (CAT5, STC, straight) · Cable assy, MJ-A6SPF0014-010C/050C/100C/200C/300C (option for NavNet VX2) · Converter connector, MJA6SERMD/TM11AP8-005 (option for NavNet VX2)
Power cable MJ-A3SPF0026-050C or 100C
Ground Ground wire IV-1. 25sq (Local supply)
POWER
1
F. G. [. . . ]