User manual FUJITSU S4542

[. . . ] Copyright Copyright Fujitsu PC Corporation has made every effort to ensure the accuracy and completeness of this document. However, as ongoing development efforts are continually improving the capabilities of our products, we cannot guarantee the accuracy of the contents of this document. Fujitsu and the Fujitsu logo are registered trademarks and LifeBook is a trademark of Fujitsu Limited. The following are registered trademarks of IBM Corporation: IBM, IBM PC AT, IBM PS/2. [. . . ] Gently pull the tray out until the CD can easily be removed from the tray. Place the CD into the tray, label side up, with the hole in the center of the CD. (Figure 4-7) 45 LifeBook S Series ­ Section Four EMERGENCY CD TRAY RELEASE If for some reason the eject button fails or you have no power, you can open the CD-ROM tray with a paper clip or similar tool inserted into the eject hole in the far right side of the front of the tray. (Figure 4-8) Disabling Auto Insert Notification Function To disable the Auto Insert Notification function, follow these easy steps: 1. Select the Device Manager tab to display the device lists for your LifeBook. The treeview will expand to show the CD-ROM drive manufacturer's name and model number. Double-click on the CD-ROM drive manufacturer's name and model number. This will open the CD-ROM drive manufacturer's name and model number dialog box. Select the Settings tab and then remove the check mark in the Auto Insert Notification box to turn it off. Click Close in the System Properties dialog box, then click Yes in the System Settings Change pop-up window when it asks you to restart your machine and activate this change. The Auto Insert Notification function can be re-activated by repeating this process and placing a check mark in the Auto Insert Notification box to turn it back on. Figure 4-8 Emergency CD Tray Release AUTO INSERT NOTIFICATION FUNCTION (with Windows 98 Second Edition pre-installed models only) The Auto Insert Notification Function allows your LifeBook to automatically start a CD as soon as it is inserted in the CD-ROM drive and the tray is closed. Your LifeBook will begin playing an audio CD or will start an application if the CD includes an auto run file. 46 User Installable Features DVD/CD Holder Tray DVD/CD Eject Button Figure 4-9 DVD Drive DVD Drive Your Fujitsu LifeBook contains a DVD drive which is both a 8x DVD player and a 24x max CD player. (Figure 4-9) POINT Complete installation of DVD Player may require updating your video driver. Please see the readme file which came with your DVD Application CD. Installing the DVD Player Software To install the DVD Player software follow these steps: 1. Make sure you either close or disable any open programs, applications and utilities. This includes the MS Office Toolbar, any anti-virus programs and screensavers. From the Start menu, select Run, type D:\WINDVD\Setup. exe and click OK. Go through the installation process by following the directions on screen. Once the installation is complete, you will be asked to restart your LifeBook. To use the DVD Player software, click Start, Programs, and then InterVideo WINDVD. Un-installing the DVD Player Software The DVD Player software should be removed if you wish to use a 3rd party DVD player instead of the Fujitsu DVD Player. Select the InterVideo WINDVD from the Add/ Remove Programs Properties dialog box. [. . . ] A form of memory in which information is stored by physically altering the material. Data stored in this way can not be changed by your LifeBook and does not require power to maintain it. SDRAM Synchronous Dynamic Random Access Memory. 93 LifeBook S Series ­ Section Eight Serial Port A connection to another device through which data is transferred one bit at a time on a single wire with any other wires only for control of the device not for transfer of data. Shadow RAM A technique of copying data or applications stored in ROM (Read Only Memory) into RAM (Random Access Memory) for access during actual operation. [. . . ]