User manual FUJITSU N3410

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual FUJITSU N3410. We hope that this FUJITSU N3410 user guide will be useful to you.


FUJITSU N3410 : Download the complete user guide (3630 Ko)

You may also download the following manuals related to this product:

   FUJITSU N3410 Software Guide (270 ko)

Manual abstract: user guide FUJITSU N3410

Detailed instructions for use are in the User's Guide.

[. . . ] Copyright Copyright and Trademark Information Fujitsu Computer Systems Corporation has made every effort to ensure the accuracy and completeness of this document. However, as ongoing development efforts are continually improving the capabilities of our products, we cannot guarantee the accuracy of the contents of this document. The absence of a product or service name, slogan, or logo does not constitute a waiver of any trademark or other intellectual property rights relating to that name, slogan, or logo owned by Fujitsu Computer Systems Corporation, its parent, subsidiaries, and affiliated companies. Fujitsu, the Fujitsu logo, and LifeBook are registered trademarks of Fujitsu Limited. [. . . ] Access Point (Infrastructure) Networks Only: If the wireless network you are establishing connectivity to implements an access control security mechanism, configuration of 802. 1x parameters may be necessary. Click [OK] to close the [Wireless Network] window which will cause the WLAN device to re-establish wireless network connectivity using the recently configured parameters. CONFIGURATION USING INTEL PROSET SOFTWARE This section explains the procedure to properly configure the WLAN device using the Intel PROSet Software. Please consult with your network administrator for these parameters: Network Name - Also known as the SSID Network Key (WEP) - Required if using static WEP keys. Activate the WLAN device using either the Wireless On/Off Switch or the Intel PROSet software. If the Control Panel is in Category view, switch to Classic view by clicking "Switch to Classic View" which can be found in the left frame of the Control Panel window. Double-click the icon [Intel PROSet] to execute the Intel PROSet Software. Enter a profile name in the Profile Name field. Static WEP keys entered in ASCII code format will be either five characters (40-bit) or thirteen characters (104-bit) in length. Static WEP keys entered in hexadecimal code format will be either ten characters (40-bit) or twenty-six characters (104-bit) in length. 9. Ad Hoc Networks: Assign the same net-work key to all the personal computers to be connected. Access Point (Infrastructure) Networks: Assign the identical network key that is programmed into the access point. If using static WEP keys, confirm the Network key by re-entering the same data in the [Confirm network key:] field. 54 W I r e l e s s L A N U s e r 's G u i d e 10. The Mandatory AP option is only used if Infrastructure mode is selected. Click the Mandatory AP button, enter the MAC address for the access point. If you are using Cisco CCX, click the Enable Cisco Client eXtentions option to enable Cisco CKIP data encryption on the Security Settings page. If you have checked the Cisco's "Mixed-Cell" box in the Advanced Setting, this option must also be checked. Select Open, Shared, WPA, or WPA-PSK in the Network Authentication options. Select either None, WEP, CKIP (if Enable Cisco Client eXtentions is enabled on the General Settings page), or TKIP for the data encryption. If WEP is selected, select either 64 or 128-bit for the Encryption Level. If your network does not employ a 802. 1x/EAP security mechanism, please skip to step 24. Click the 802. 1x Enabled checkbox to enable the 802. 1x security option. Please contact your network administrator if configuration of this setting is required. Please contact your network administrator if configuration of this setting is required. [. . . ] A specific technology of making RAM which does not require periodic data refreshing. Some systems allow you to specify any SSID as an option so you can join any network. Status Indicator A display which reports the condition of some portion of your hardware. On your LifeBook notebook this is an LCD screen just above the keyboard. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE FUJITSU N3410




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual FUJITSU N3410 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.