User manual FUJITSU B2620

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual FUJITSU B2620. We hope that this FUJITSU B2620 user guide will be useful to you.


FUJITSU B2620 : Download the complete user guide (3237 Ko)

You may also download the following manuals related to this product:

   FUJITSU B2620 Software Guide (502 ko)

Manual abstract: user guide FUJITSU B2620

Detailed instructions for use are in the User's Guide.

[. . . ] Copyright Copyright Fujitsu PC Corporation has made every effort to ensure the accuracy and completeness of this document. However, as ongoing development efforts are continually improving the capabilities of our products, we cannot guarantee the accuracy of the contents of this document. Fujitsu, the Fujitsu logo, and LifeBook are registered trademarks of Fujitsu Limited. The following are registered trademarks of Microsoft Corporation: MS, MS-DOS, Windows. [. . . ] Check your device and operating system documentation and activate the proper driver. Your external monitor is not properly installed. Your operating system software is not setup with the correct software driver for that device. Miscellaneous Problems An error message is displayed on the screen during the operation of an application. Your external monitor is not compatible with your notebook. See your monitor documentation and the External Monitor Support portions of the Specifications section. See "Specifications" on page 73. See your application manual and help displays screens for more information. Not all messages are errors some may simply be status. 59 LifeBook B Series ­ Section Five POWER ON SELF TEST MESSAGES The following is an alphabetic list of error-and-status messages that Phoenix BIOS and/or your operating system can generate and an explanation of each message. If an error message is displayed that is not in this list, write it down and check your operating system documentation both on screen and in the manual. If you can find no reference to the message and its meaning is not clear, contact your support representative for assistance. nnnn Cache SRAM Passed Where nnnn is the amount of system cache in kilobytes successfully tested by the Power On Self Test. (This can only appear if you have an SRAM PC Card installed. ) *Diskette drive A error or Diskette drive B error Drive A: or B: is present but fails the BIOS Power On Self Test diskette tests. Check to see that the drive is defined with the proper diskette type in the Setup Utility, See "BIOS Setup Utility" on page 29. If the disk drive is properly defined and installed, avoid using it and contact your support representative. *Extended RAM Failed at offset: nnnn Extended memory not working or not configured properly. If you have an installed memory upgrade module, verify that the module is properly installed. If it is properly installed, you may want to check your Windows Setup to be sure it is not using unavailable memory until you can contact your support representative. nnnn Extended RAM Passed Where nnnn is the amount of memory in kilobytes successfully tested. *Failing Bits: nnnn The hex number nnnn This is a map of the bits at the memory address (in System, Extended, or Shadow memory) which failed the memory test. This is a serious fault that may cause you to lose data if you continue. *Fixed Disk x Failure or Fixed Disk Controller Failure (where x = 1-4) The fixed disk is not working or not configured properly. This may mean that the hard drive type identified in your setup utility does not agree with the type detected by the Power On Self Test. Run the setup utility to check for the hard drive type settings and correct them if necessary. If the settings are OK and the message appears when you restart the system, there may be a serious fault which might cause you to lose data if you continue. [. . . ] If you try to remove the driver while the device is detached from the computer, the driver is not removed. Right click the [My Computer] icon on the desktop, and then click [Properties] from the menu that appears. Right click [Intersil PRISM Wireless LAN PCI Card], and click [Uninstall] from the menu that is displayed. Make sure that the icon has disappeared from the task tray in the lower right corner of the screen. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE FUJITSU B2620




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual FUJITSU B2620 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.