User manual FUJIFILM FINEPIX 6800

[. . . ] Warning To prevent fire or shock hazard, do not expose the unit to rain or moisture. This symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ] See P. 102 for information on playing back voice captions on your PC. !Use the "DISP" button to revert to normal playback. 76 The "9" icon is displayed. !G If the sound is difficult to hear, adjust (P. 93, 95). N Compatible Voice Memo Files N the volume The FinePix6800 ZOOM can play back voice memo files recorded on an FinePix6800 ZOOM and voice memo files up to 30 seconds long recorded on a 3. 3V SmartMedia using a FUJIFILM digital camera. 77 PLAYBACK MENU { ERASING SINGLE · ALL FRAMES/FORMATTING FRAME Erases only the selected file. 1 2 G G 3 !G Protected files (P. 81, 83) are not erased. ALL FRAMES Erases all unprotected files. G FORMAT Erases all the data and reformats (initializes) the SmartMedia for use with this camera. !G Formatting also erases protected files. If you press the "MENU/OK" button, the menu screen will appear on the LCD monitor. Use "d" or " c" to select "{ERASE". Use "a" and " b " to select "FRAME", Press the "MENU/OK" button. FRAMES" or "FORMAT". "ALL !G If 78 " ", " ", "· " or "§ " is displayed, first wipe the contact surface on the SmartMedia (gold-colored area) thoroughly with a soft, dry cloth and then reload the SmartMedia. If this does not resolve the problem, format the card. ­ A confirmation message appears. To erase all the frames or format the SmartMedia, press the "MENU/OK" button. In the frame erase screen, use "d" or "c" to select a file and then press the "MENU/OK" button. 4 !G Press the "BACK" button to exit the menu. Formatting erases all the data on the SmartMedia, including protected files. cancel the frame erase procedure, press the "BACK" button. When you press the "MENU/OK" button, the image is erased. ª 79 PLAYBACK MENU } PLAYBACK (AUTOMATIC PLAYBACK) PLAYBACK MENU O SETTING AND REMOVING SINGLE FRAME PROTECTION 1 2 G G 1 2 G G G Press the "MENU/OK" button to display the menu on the monitor. Use "d" or "c" to select "}PLAYBACK". The image frames are automatically advanced and played back. Press the "MENU/OK" button to display the menu on the monitor. Use "d" or " c" to select "OPROTECT". Use "a" or "b" to select "FRAME SET/RESET". G If you press the "DISP" button once during playback, the playback frame number is displayed on the monitor. G To interrupt "} PLAYBACK", press the "BACK" button. playback is an easy way to select images to be protected (P. 38). 80 Protection can be set for an image to prevent it from being inadvertently erased. However, note that formatting erases all images ( P. 78). 81 PLAYBACK MENU O SETTING AND REMOVING SINGLE FRAME PROTECTION PLAYBACK MENU O SETTING AND REMOVING PROTECTION FOR ALL FRAMES 3 4 1 2 G G G Use "d" or "c" to select the image to be protected. Press the "MENU/OK" button to protect the file. To remove the protection, press the "MENU/OK" button again. Press the "MENU/OK" button to display the menu on the LCD monitor. Use "d" or " c" to select "OPROTECT". Use "a" or " b " to select "PROTECT ALL" Press the "MENU/OK" button. "UNPROTECT ALL". 4 or !G If you do not want to protect any images, press the 82 "BACK" button to return to the menu. To exit the menu screen, press the "BACK" button again. To protect another image, repeat the procedure from step 3 . Note that formatting erases all images, including protected images (P. 78). 83 PLAYBACK MENU O SETTING AND REMOVING PROTECTION FOR ALL FRAMES PLAYBACK MENU F HOW TO SPECIFY PRINT OPTIONS 3 With the FinePix6800 ZOOM, you can order prints using the Digital Print Order Format (DPOF). You can use the DPOF to specify the following : G The frames to be printed and the number of prints for each frame G Imprinting of the date and time This section gives a detailed description of how to order your prints with the FinePix6800 ZOOM. [. . . ] Filled circles with an exclamation mark notify the user of an action that must be performed ("Required"). 126 127 Safety Notes WARNING Never attempt to modify or disassemble the camera. (Never open the casing. ) Do not use the camera when it has been dropped or the casing is damaged. This can cause a fire or electric shock. WARNING Do not modify, heat or unduly twist or pull the connection cord and do not place heavy objects on the connection cord. These actions could damage the cord and cause a fire or electric shock. [. . . ]