User manual FLUKE CONNECTOR BLOC FOR RPM4 INSTALLATION
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual FLUKE CONNECTOR BLOC FOR RPM4. We hope that this FLUKE CONNECTOR BLOC FOR RPM4 user guide will be useful to you.
 |
FLUKE CONNECTOR BLOC FOR RPM4 INSTALLATION: Download the complete user guide (153 Ko) |
Manual abstract: user guide FLUKE CONNECTOR BLOC FOR RPM4INSTALLATION
Detailed instructions for use are in the User's Guide.
[. . . ] //mTM Connector Bloc for RPM4TM
P/N 401929 Installation Instructions
//m CONNECTOR BLOC, P/N 402168, INCLUDES:
QTY 1 2 2 4 1 PART NO 402169 101006-Z 102464-Z 103345 560073 M3 screw M3 split washer Adapter, 1/8 in. [. . . ] Maximum working pressure is 7 MPa (1 000 psi).
INSTALLATION INSTRUCTIONS
Install the four 1/8 in. Remove the two Philips head screws from the extreme right and left hand corners of the RPM4 Hi and Lo Q-RPT modules (1, 3). Remove the cover of the //m connector bloc by removing the two top (5) and two lateral (4) button head socket screws. Connect the four 1/8 swage F connections of the //m connector (6) to the four 1/8 swage M adapters on the RPM4 TEST(+) and TEST(-) ports. Attach the //m connector bloc (7) to the RPM4 using the two M3 screws supplied with the kit. Install the screws in the lower right hand corners of the Q-RPT modules (1, 3). [. . . ] Document 560073 041122
DH Instruments, Inc.
4765 East Beautiful Lane Phoenix AZ 85044-5318 USA
Tel 602. 431. 9100 Fax 602. 431. 9559 dhi@dhinstruments. com www. dhinstruments. com [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE FLUKE CONNECTOR BLOC FOR RPM4
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual FLUKE CONNECTOR BLOC FOR RPM4 will begin.