User manual EPSON PERFECTION V350 PHOTO BROCHURE

[. . . ] 12 W stand by 220-240 V model AC 198 to 264 V Operating conditions Ordinary office or home conditions; avoid extreme dust, direct sunlight, and strong light sources. Make sure the outlet provides enough power. Safety Approvals 120 V model Safety standards UL 1950 with D3 CSA C22. 2 No. [. . . ] 950 EMC FCC part 15 subpart B class B CSA C108. 8 class B 230 V model Safety standards EN 60950 EMC EN 55022 (CISPR Pub 22) class B AS/NZS 3548 class B Interface Light source Reliability Dimensions CE marking 230 V model Low Voltage Directive 73/23/EEC EN 60950 EMC Directive 89/336/EEC EN 55022 Class B EN 61000-3-2 EN 61000-3-3 EN 50082-1 IEC 801-2 IEC 801-3 IEC 801-4 Weight Electrical Specification Input voltage range Rated frequency Input frequency Rated current Power consumption Note: USB Interface Interface type Configuration Element Configuration Description Characteristics: Self-powered Remote wake up feature: Not supported Maximum power consumption from VBUS: 2mA (5V) No alternate setting Number of endpoints used by this interface (excluding endpoint 0): 2 Class: Vendor specific Bulk IN transfer Maximum data transfer size: 64 byte Bulk OUT transfer Maximum data transfer size: 64 byte Language ID: US English 1: iManufacturer: EPSON 2: iProduct: Perfection1200 Universal Serial Bus Specification Revision 1. 0 Check the label on the back of the scanner for voltage information. Environmental Temperature Operation: 41 to 95 °F (5 to 35 °C); 50 to 90 °F (10 to 32 °C) when using the auto document feeder Storage: 13 to 140 °F (25 to 60 °C) Operation: 10% to 80%; 20% to 80% when using the auto document feeder Storage: 10% to 85% Interface Endpoint 1 Endpoint 2 String Descriptor Humidity (without condensation) 2 - EPSON Perfection 1200 8/99 EPSON Perfection 1200 Electrical standard Full Speed mode (12Mbit/s) of Universal Serial Bus Specification Revision 1. 0 Connector type Connector pin arrangement Pin number 1 2 3 4 Signal VCC Connector Hardware initialization Software initialization Connector pin arrangement One receptacle (series B) Initialization methods The scanner can be initialized (returned to a fixed set of conditions) in the following ways: * The scanner is turned on. * The scanner receives a SCSI Bus Device Message. DATA +DATA GND Initialization methods The scanner can be initialized (returned to a fixed set of conditions) in the following ways: Hardware * The scanner is turned on. initialization * The USB cable is unplugged from the USB port on the scanner. Software * Software sends the ESC @ (initialize the scanner) initialization command. * The scanner receives a Bus Reset from the USB interface. Optional Transparency Unit Specifications The transparency unit (B813172) allows you to scan positive and negative transparent materials 35 mm slides, filmstrips, and film up to 4 × 5 inches in size. The transparency unit comes bundled with the EPSON Perfection 1200U PHOTO. SCSI Interface Interface type Functions ANSI X3T9. 2/375R Revision 10L (SCSI-2) BUS FREE phase ARBITRATION phase SELECTION/RESELECTION phase COMMAND phase (the Logical Unit Number is fixed to 0 and the command link function is not supported) DATA phase Data in phase Data out phase STATUS phase MESSAGE phase MESSAGE IN phase MESSAGE OUT phase ATTENTION condition RESET condition TTL compatible Basic Specifications Dimensions Width: 8. 7 inches (222 mm) Depth: 12. 0 inches (305 mm) Height: 1. 4 inches (36 mm) 1. 5 lb (0. 7 kg) 3. 6 × 4. 6 inches ([93 × 118 mm] size of 4 × 5-inch film holder opening) Supply voltage: DC 24 V ±10% V Rated current: 0. 5 A 10, 000 hours for light source Operation: 41 to 95 °F (5 to 35 °C) Storage: 13 to 140 °F (25 to 60 °C) Operation: 10% to 80% Storage: 10% to 85% Ordinary office or home conditions; avoid extreme dust, direct sunlight, and strong light sources. Weight Maximum readable area Electrical Reliability Temperature Humidity (without condensation) Operating conditions Logic level Electrical standard ANSI X3T9. 2/375R Revision 10L (SCSI-2) ID Setting Terminator Connector type Selectable from 0 to 7 (factory setting: 2) Internal terminator selectable (enable/ disable) Two half pitch 50-pin connectors 8/99 EPSON Perfection 1200 - 3 EPSON Perfection 1200 Safety approvals UL 1950 CSA C22. 2 No. Light status and button functions are described in the tables below. t Photo Print CD-ROM t Scanner Basics guide EPSON Perfection 1200S includes: t EPSON Perfection 1200S scanner t SCSI adapter card t SCSI cable t Windows and Macintosh CD-ROMs that include: EPSON TWAIN Driver Adobe PhotoDeluxe Business Edition (Windows) or Adobe PhotoDeluxe version 2. 0 (Macintosh) BrØderbund The Print Shop PressWriter NewSoft Presto!PageManager for EPSON Electronic manuals (pdf) t Scanner Basics guide Scanner operate light Light status F (slowly flashing) N F (rapidly flashing) Color Green Green Red Scanner status Initializing or busy scanning Ready to scan images The scanner is locked. Turn off the scanner, unlock the transportation lock, then turn the scanner on. The scanner is turned off O N/A N = on, O = off, F = flashing Scanner buttons Button Function Turns the scanner on and off. You must set up the scanner monitor and a compatible application to use this button. [. . . ] You must set up the scanner monitor and a compatible application to use this button. See the EPSON TWAIN Users Guide for more information. P Operate ] Start Related Documentation CPD 8881 CPD 8880 EPSON Perfection 1200U, 1200U PHOTO Scanner Basics EPSON Perfection 1200S Scanner Basics EPSON TWAIN Users Guide (pdf) EPSON Perfection 1200 Technical Manual (applies to 1200U/ 1200U PHOTO/1200S) Scanner Models The scanner is available in three different models. [. . . ]