User manual EPSON F-3200 REFERENCE GUIDE

[. . . ] Rated voltage Document specifications DC 24 V ± 10%, DC 5 V ± 5% Positive or negative film in the following sizes: 35 mm strips (24 frames) 35 mm slides (8 slides) 120/220 (6 × 12 cm) film (3 frames) 4 × 5-inch film (2 frames) 5. 7 × 9. 1 inches (144 × 231 mm) Note: Scanners sold outside the US market may operate at a different voltage. Check the label on the back of the scanner for voltage information. Readable area Scanning and Restoring Photos The following example uses Adobe® Photoshop® Elements and EPSON Scan. If you are using another software application, your steps may be different. [. . . ] If you are using another software application, your steps may be different. Start Adobe Photoshop Elements: In Windows, click Start > Programs or All Programs > Adobe Photoshop Elements 2. 0. Environmental Temperature Humidity (without condensation) Operating conditions Operation: 41 to 95 °F (5 to 35 °C) Storage: ­13 to 140 °F (­25 to 60 °C) Operation: 10% to 80% Storage: 10% to 85% Ordinary office or home conditions; avoid extreme dust, direct sunlight, and strong light sources. On a Macintosh, open the Adobe Photoshop Elements 2 folder (in your Applications folder) and double-click the Photoshop Elements 2. 0 icon. You see a screen similar to this: Safety Approvals Safety EMC UL 60950 CSA C22. 2 No. 60950 FCC part 15 subpart B class B CSA C108. 8 class B USB Interface Interface type Connector type Universal Serial Bus Specification Revision 2. 0 One receptacle (Type B) FireWire Interface Interface type Data transfer Synchronization Encoding/ Decoding Logic level IEEE 1394a-2000 compatible Half-duplex data/strobe differential serial Clock synchronization with DS-Link DS-Link 3. 3 V 2 - EPSON Perfection 4870 Series 12/03 EPSON Perfection 4870 Series 4. Do one of the following: If you're using Home Mode, click the Image Adjustments button. If you're using Professional Mode, scroll to the bottom of the screen. Select the Digital ICE or Color Restoration checkbox: If your photo is dirty, scratched, creased, or torn, select Digital ICE. Scanning Transparencies and Film Before scanning transparent documents, you need to remove the scanner's reflective document mat; this exposes the scanner's transparency unit (light source), which is built into the lid. Click the Preview button at the bottom of the screen. Make sure this calibration space is uncovered 7. Close the scanner cover. 4 - EPSON Perfection 4870 Series 12/03 EPSON Perfection 4870 Series Thumbnails of your images appear in the Preview window: Indicator Light The indicator light (next to the ] Start button) indicates the status of the scanner, as described below. Light On Flashing Flashing Color Green Green Red Status The scanner is ready to scan images. Check the following, then turn your scanner off and back on to reset it: Make sure the transportation lock is turned to the unlocked position. If you are scanning transparencies, make sure you've removed the reflective document mat. For each thumbnail, select from the following Image Adjustment options: Grain Reduction (available only in Professional mode). Removes scratches, dust and fingerprints. Off -- If this does not eliminate the error, the fluorescent lamp may need to be replaced or the scanner may have another problem. The scanner is unplugged or turned off. Transporting the Scanner If you need to ship your scanner, you must prepare it for transportation in it's original box or one of a similar size. [. . . ] Removes scratches, dust and fingerprints. Off -- If this does not eliminate the error, the fluorescent lamp may need to be replaced or the scanner may have another problem. The scanner is unplugged or turned off. Transporting the Scanner If you need to ship your scanner, you must prepare it for transportation in it's original box or one of a similar size. Turn on the scanner and wait until the carriage moves to the home position. [. . . ]