User manual EPSON EMP-82

[. . . ] Indicates a page where useful information regarding a topic can be found. Indicates that an explanation of the underlined word or words in front of this symbol appears in the glossary of terms. Indicates buttons on the remote control or projector's control panel. Example: "Image"-"Color Mode" Indicates the port name of the projector. [. . . ] When using above an altitude of about 1500m, set to "ON". User's Logo You can record your favorite image as a user's logo. The logo will be projected when projection starts and when the A/V mute is set. When a user's logo is recorded, the previous user's logo will be erased. Follow the instructions on the screen to record a user 's logo. Selection frame Record Move the selection frame so that the area of the image to be recorded is inside the frame. Select the display ratio. · The image will be displayed in dot format while the selection frame is displayed, therefore the display size may change. · Once a user's logo has been recorded, you cannot return the logo to the default setting. · To use the recorded user's logo, set "Background Color" to "Logo". Display Menu Color Selects the colour for the main configuration menu and the navigation bar. · Color 1:Purple · Color 2:Black Configuration Menu 29 Configuration Menu Functions Message This sets whether the following message displays appear (ON) or don't appear (OFF). · Image signal, colour mode, aspect and item name when memory settings are retrieved · Messages such as when no image signals are being input, when an incompatible signal is input, and when the internal temperature rises Background Color Displays a menu for selecting the screen status for when the A/V mute is set or when no image signal is input. Startup Screen This sets whether the start-up screen (the image that is projected when projection starts) is displayed (ON) or not displayed (OFF). If you change the setting, the new setting will take effect after the power has been turned off and the cool-down period is complete. Input Signal Video Signal Sets the signal format in accordance with the video equipment that is connected to the [Video] or [SVideo] input port. If set to "Auto", the video signal format is set automatically. Press on the remote control to cancel the A/V mute. Check that the power for the connected equipment is turned on. If the "Message" menu command has been set to "ON", messages relating to the image signals will be displayed. "Setting" - "Display" - "Message" p. 30 If a composite video or S-Video signal is being input If projection does not occur when the "Video Signal" menu command is set to "Auto", select the signal format that matches the signal source. "Setting" - "Input Signal" - "Video Signal" p. 30 Are the image signal format settings correct? 34 Problem Solving Are the image signal format settings correct? If the signal source is connected to the [InputA] port Use the "Input Signal" menu command to set the signal format that matches the signal that is being projected from the connected equipment. "Setting" - "Input Signal" - "Input A" p. 30 You can also press on the remote control to select the format. p. 15 If the VCR or DVD equipment is connected using an RGB SCART adapter Press to set the signal format to "RGB-Video". p. 15 When still no images appear and the DVD equipment is connected, change the setting at the DVD equipment to RGB output. Have the configuration menu settings been made correctly? Try resetting all of the current settings. p. 31 If the connection is made while the power is already turned on, the Were the projector and computer connected while their function (Fn) key that switches the computer's video signal to power was already turned on?Turn the power for the computer that is connected to the projector off and then back on again. When a computer is connected Is the computer display output set to only the computer's accessory screen?When a computer is connected The image signals need to be output externally. Change the output setting to an external destination only or to an external destination as well as the computer's own monitor. [. . . ] The process of matching the phases of these signals (the relative position of the crests and troughs in the signal) is called "synchronization". If the signals are not synchronized, problems such as flickering, blurriness and horizontal interference can occur. If the projector frequency does not match this frequency, the resulting images will not be of a good quality. The process of matching the frequency of these signals (the number of crests in the signal) is called "tracking". [. . . ]