User manual EPSON EB-4750W SPECIFICATIONS

[. . . ] The EPSON Status Monitor 3 utility lets you check the status of your printer quickly and easily. Must be Notes contain important information and useful tips on the operation of your printer. Important safety instructions Read all of these safety instructions before using the printer. In addition, follow all warnings and instructions marked on the printer itself. [. . . ] Check that the name you entered for the port has been added and selected, and then click Close. Canceling Printing If the printouts are not what you expected and contain incorrect or garbled characters or images, you may need to cancel printing. Using the printer button Press the Pause button, and then press the Job Cancel button for three seconds to cancel a print job in progress. printer Software 47 GP-C830/GP-M830/GP-C831/EB-4750W/GP-C832/GP-M832 User’s Guide When canceling all printing documents , select Cancel All Documents on the Printer menu. When canceling a specific document, select the document you want to cancel, and then select Cancel on the Document menu. Uninstalling the Printer Software When you want to reinstall or upgrade the printer driver, uninstall the printer driver that is currently installed. For Windows 8 or Server 2012: Click Desktop on the Start screen, move the cursor to the top-right corner of the screen, click Settings, and then click Control Panel. For Windows 7, Vista, XP, Server 2008 R2, Server 2008, or Server 2003: Click Start, and then click Control Panel. Select the EPSON Printer Software, and then click Uninstall/Change (Windows 8, 7, Vista, Server 2012, Server 2008 R2, or Server 2008) or Change/Remove (Windows XP or Server 2003). printer Software 49 GP-C830/GP-M830/GP-C831/EB-4750W/GP-C832/GP-M832 User’s Guide 5. Click the Printer Model tab, select the icon of the printer you want to uninstall, and then click OK. In this mode, you can press the FF D and Load/Eject U buttons to adjust the top-of-form or tear-off position. For more information, see “Adjusting the top-of-form position” on page 24. Control Panel 54 GP-C830/GP-M830/GP-C831/EB-4750W/GP-C832/GP-M832 User’s Guide Chapter 6 Troubleshooting Using the Error Indicators You can identify many common printer problems using the lights on the control panel. If your printer stops working and one or more control panel lights are on or flashing or the printer beeps, use the following table to diagnose and fix the problem. If you cannot fix your problem using this table, see “Problems and Solutions” on page 57. Panel light state Beep pattern Problem Solution N On N Paper O No paper is attached to the tractor unit or the paper is used up during printing. Attach the paper to the tractor, and then press the Load/Eject button. Then, reattach the paper to the tractor and press the Load/Eject button. If the paper is advanced too far and ejection failed, press the Load/ Eject button again to feed the paper backward. If the length of the paper that you want to eject is longer than about 550 mm (22 inches), tear off the paper, and then press the Load/ Eject button. Troubleshooting 55 GP-C830/GP-M830/GP-C831/EB-4750W/GP-C832/GP-M832 User’s Guide Panel light state Beep pattern Problem Solution N On NKB N Y B* N M B* N C B* O The ink cartridge has reached its replacement time. [. . . ] Press the Load/Eject button and remove any paper loaded in the printer. Unplug the power cord from the electrical outlet, and then disconnect the interface cable from the printer. Repack the printer and power cord in their original packing materials and place them in the printer’s original box. Product Information 108 GP-C830/GP-M830/GP-C831/EB-4750W/GP-C832/GP-M832 User’s Guide Copyright and Trademarks No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Seiko Epson Corporation. [. . . ]