User manual EPSON ACULASER C3800

[. . . ] EPSON AcuLaser C3800 User's Guide User's Guide NPD2252-00 EPSON AcuLaser C3800 User's Guide Copyright and Trademarks No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, mechanical, photocopying, recording, or otherwise, without the prior written permission of Seiko Epson Corporation. No patent liability is assumed with respect to the use of the information contained herein. Neither is any liability assumed for damages resulting from the use of the information contained herein. Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this product or third parties for damages, losses, costs, or expenses incurred by purchaser or third parties as a result of: accident, misuse, or abuse of this product or unauthorized modifications, repairs, or alterations to this product, or (excluding the U. S. ) failure to strictly comply with Seiko Epson Corporation's operating and maintenance instructions. [. . . ] When installation is done, click Quit. Note: If you are connecting two or more EPSON printers of the same model using AppleTalk, and you want to rename the printer, see the Network Guide. Selecting the printer After installing the PostScript 3 printer driver, you need to select the printer. Using the PostScript Printer Driver 157 EPSON AcuLaser C3800 User's Guide Selecting the printer when it is connected via a USB connection for Mac OS 9 users If the printer is connected to your computer via a USB port, you will not be able to select the printer from the Chooser. You will have to launch the Apple Desktop Printer Utility, then register the printer as a Desktop Printer. The Desktop Printer Utility is automatically installed when you install the Adobe PostScript printer driver. Follow the steps below to select the printer and to create a Desktop Printer. Note: When printing via the USB port from a Power Macintosh running Mac 0S 9, the printer must be set to handle ASCII data. To specify this setting, select Print from the File menu of the application that you are using, then select the name of the application from the options available in the Print dialog box. On the setup option page that appears, select ASCII for the data format setting. The actual setting name varies by application, but is often called Encoding or Data. 1. Open the AdobePS Components folder in your hard disk, then double-click the Desktop Printer Utility. Select AdobePS from the With pop-up menu, click Printer (USB) in the Create Desktop list, then click OK. Select your printer from the list of connected USB printers, then click OK. Click Auto Setup to select the PostScript Printer Description (PPD) file. When a PPD file is selected, the selected printer name will be displayed under the printer icon. If the printer name is incorrect, click Change, then select the correct PPD file. A warning message suggesting to save changes to desktop printer appears. The USB printer icon will be displayed on the desktop. Selecting a printer in a network environment If the printer is connected through the Ethernet interface or an optional network card. For Mac OS X users Follow the steps below to select the printer. Using the PostScript Printer Driver 158 EPSON AcuLaser C3800 User's Guide Note: You cannot use FireWire for printer connection in the PostScript 3 mode. Although EPSON FireWire appears in the interface pop-up list, it cannot be used with the PostScript 3 printer driver. You need to make the settings for your installed options manually when the printer is connected using USB, IP printing, or Bonjour (Rendezvous). When the printer is connected using AppleTalk, the printer software automatically makes the settings. Make sure to specify ASCII as the data format in the application. 1. Open the Applications folder, open the Utilities folder, then double-click Printer Setup Utility (for Mac OS X 10. 3 and 10. 4) or Print Center (for Mac OS X 10. 2). Select the protocol or the interface that you are using from the pop-up list. Note for Appletalk users: Make sure to select AppleTalk. Do not select EPSON AppleTalk, because it cannot be used with the PostScript 3 printer driver. [. . . ] This is a toll-free number and can be accessed (9 A. M to 9 P. M) anywhere in the country. Help for Users in the Philippines To obtain technical support as well as other after sales services, users are welcome to contact the Epson Philippines Corporation at the telephone and fax numbers and e-mail address below: Phone: Fax: E-mail: (63) 2-813-6567 (63) 2-813-6545 epchelpdesk@epc. epson. com. ph World Wide Web (http://www. epson. com. ph) Information on product specifications, drivers for download, Frequently Asked Questions (FAQ), and E-mail Enquiries are available. Epson Helpdesk (Phone: (63) 2-813-6567) Our Hotline team can help you with the following over the phone: Sales enquiries and product information Product usage questions or problems Enquiries on repair service and warranty Customer Support 287 EPSON AcuLaser C3800 User's Guide Appendix B Technical Specifications Paper Since the quality of any particular brand or type of paper may be changed by the manufacturer at any time, Epson cannot guarantee the quality of any type of paper. Always test samples of paper stock before purchasing large quantities or printing large jobs. Available paper types Paper type Plain paper Semi-Thick Paper Envelopes Labels Thick paper Extra thick paper EPSON Color Laser Paper EPSON Color Laser Transparencies EPSON Color Laser Coated Paper Colored paper Paper with letterhead Description Weight: 60 to 80 g/m² (Recycled paper is acceptable. *1) Weight: 81 to 105 g/m² (Recycled paper is acceptable. *1) No paste and no tape. (unless specifically designed for laser printers. ) The backing sheet should be covered completely, with no gaps between labels. [. . . ]