User manual ENCORE ENKVM-PS2

[. . . ] A VGA, SVGA, or Multisync monitor capable of the highest resolution that you will be using on any computer in the installation A PS/2 Mouse A PS/2 Keyboard Computers The following equipment must be installed on each computer that is to be connected to the system: · Before you begin, make sure that the power to all the devices you will be connecting has been turned off. [. . . ] Hotkey Port Selection All Hotkey port switches begin with tapping the [Ctrl] key twice. Press and release the [Left shift] key, and then press the [Right shift] key. Auto Scan Interval Sets the Auto Scan interval to "n" second intervals - where "n" is a number from 1 ­ 4. Note: The "n" stands for the number of seconds that the focus dwells on a port before switching to the other one. Replace the "n" with a number between 1 and 4 when entering this hotkey combination. Action Unplug the keyboard from the Console Keyboard Port, then plug it back in. Wait five seconds; then plug the cables back in and turn the computers on. pressing Hot Keys Gets No Response* Hotkey sequence input incorrectly. [. . . ] If you connect the mouse port, you will need to use the notebook's keyboard when the notebook becomes the active computer. [. . . ]