User manual EINHELL RG-AW 1139

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual EINHELL RG-AW 1139. We hope that this EINHELL RG-AW 1139 user guide will be useful to you.


EINHELL RG-AW 1139 : Download the complete user guide (1146 Ko)

You may also download the following manuals related to this product:

   EINHELL RG-AW 1139 ANNEXE 1000 (600 ko)

Manual abstract: user guide EINHELL RG-AW 1139

Detailed instructions for use are in the User's Guide.

[. . . ] Children must always be supervised in order to ensure that they do not play with the equipment. Please read the directions for use carefully and observe the information provided. It is important to consult these instructions in order to acquaint yourself with the machine, its proper use and safety precautions. Suitable measures must be taken to keep the equipment out of the reach of children. [. . . ] Find the cause of the fault using the pump's operating manual (for example leaking intake line) and rectify it. Ensure that you bleed the pump correctly (refer to the pump's manual for further details). 2 / Item 5) to the connection adapter and secure it to the connection adapter using the union nut (Fig. The flow switch must be in an upright position, in other words the connector for the pump (Fig. 2 / Item 5) must be at the bottom and the connector for the output line (Fig. If it is in any other position, the flow switch cannot work correctly. 5) and carefully fill the flow switch with the transport fluid up to the bottom end of the thread on the pressure connector (Fig. 2 / Item 6) on the flow switch and ensure that you seal the connection properly, for example with Teflon tape (not supplied). After checking all the connections and lines, connect a consumer to the output line and open it so that any air in the output line can escape when the transport process is started. 1 / Item 3) on the flow switch to an adequately fused (at least 10 A) 230V ~ 50Hz safety mains socket with a ground contact. Switch on the pump if it is fitted with a switch, otherwise the pump will now start automatically and will start to transport the medium. The consumer can be closed as soon as the transport fluid is emitted from it. If you place it into storage, ensure that the flow switch does not contain any transport fluid so as to avoid frost damage. If the power cable for this equipment is damaged, it must be replaced by the manufacturer or its aftersales service or similarly trained personnel to avoid danger. The only requirement is for regular checks on the screw connections and line to ensure that they are correctly positioned, secure and not leaking so that error sources can be identified and rectified as soon as possible. Please quote the following data when ordering replacement parts: Type of machine Article number of the machine Identification number of the machine Replacement part number of the part required For our latest prices and information please go to www. Fault Pump does not cut in Possible cause Power failure Pump not switched on Pump cuts out and in constantly Pump does not cut out Output side leaking Output side leaking Consumer open Pump does not cut in No transport fluid is being discharged, the output line is adequately pressurized Remedy Check the cable and fuse Switch on pump Check consumers and output line for leaks Check consumers and output line for leaks Close consumer Open consumer K t p erklärt folgende Konformität gemäß EU-Richtlinie und Normen für Artikel declares conformity with the EU Directive and standards marked below for the article déclare la conformité suivante selon la directive CE et les normes concernant l'article verklaart de volgende conformiteit in overeenstemming met de EU-richtlijn en normen voor het artikel declara la siguiente conformidad a tenor de la directiva y normas de la UE para el artículo declara a seguinte conformidade de acordo com a directiva CE e normas para o artigo förklarar följande överensstämmelse enl. T For EU countries only Never place any electric tools in your household refuse. To comply with European Directive 2002/96/EC concerning old electric and electronic equipment and its implementation in national laws, old electric tools have to be separated from other waste and disposed of in an environment-friendly fashion, e. This can also be done by handing over the used device to a returns center, which will dispose of it in accordance with national commercial and industrial waste management legislation. This does not apply to the accessories and auxiliary equipment without any electrical components which are included with the used device. The reprinting or reproduction by any other means, in whole or in part, of documentation and papers accompanying products is permitted only with the express consent of ISC GmbH. [. . . ] The original guarantee period remains applicable to the device even if repairs are carried out or parts are replaced. In such cases, the work performed or parts fitted will not result in an extension of the guarantee period, and no new guarantee will become active for the work performed or parts fitted. In order to assert your guarantee claim, please send your defective device postage-free to the address shown below. Please enclose either the original or a copy of your sales receipt or another dated proof of purchase. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE EINHELL RG-AW 1139




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual EINHELL RG-AW 1139 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.