User manual EAW AS415E DATASHEET

[. . . ] SPECIFICATIONS AS415e DESCRIPTION A dedicated low frequency system in a trapeziodal enclosure. [. . . ] Applications include: Stadiums Performing Arts Centers Arenas Houses of Worship PERFORMANCE Frequency Response (Hz) ±3 dB 60 Hz to 500 Hz -10 dB 47 Hz Axial Sensitivity (dB SPL, 1 Watt @ 1m) LF 97 Impedance (Ohms) LF 8 Power Handling (Watts, Continuous) LF 600 Recommended High-Pass Frequency 24 dB/Octave 40 Hz Calculated Maximum Output (dB SPL @ 1m) LF Peak 130 LF Long Term 124 PHYSICAL Product Group Configuration LF Subsystem & Loading Cabinet Type (shape) Enclosure Materials Finish Connectors Suspension Hardware I Dedicated low frequency system 1x 15-in, vented Trapezoidal Exterior grade Baltic birch plywood Wear-resistant textured black paint 2-Contact terminal strip (18) 3/8"-16 threaded mounting points (4 each top and bottom and sides, 2 on back) Powder coated perforated steel inches millimeters 22. 5 572 24. 6 626 16. 5 419 23 584 10 Degrees per Side pounds kilograms 88 40. 0 103 46. 9 Grille Dimensions Height Width (front) Width (rear) Depth Trapezoid Angle Weights Net Weight Shipping Weight One Main Street, Whitinsville, MA 01588 508 234 6158 Toll Free 800 992 5013 EAW products are continually improved. All specifications are therefore subject to change without notice. FAX 508 234 8251 AS415e/2 pp info@eaw. com October 2001 www. eaw. com Printed in USA SPECIFICATIONS AS415e DIMENSIONAL DRAWING INDICATES MOUNTING POINT, 3/8-16 THREADED HOLE (PI ANGLE). SYMBOL INDICATES CENTER OF BALANCE A & E SPECIFICATIONS The low frequency loudspeaker system shall incorporate a 15in LF transducer that shall be mounted in a vented enclosure tuned for optimum LF response. System frequency response shall vary no more than ±3 dB from 60 to 500 Hz measured on axis. The system shall produce a Sound Pressure Level (SPL) of 97 dB SPL on axis at 1 meter with a power input of 1 Watt, and shall be capable of producing a peak output of 130 dB SPL on axis at 1 meter. The system shall handle 600 Watts of amplifier power (continuous) and shall have a nominal impedance of 8 Ohms. It shall be constructed of multi-ply, void-free, cross-grain-laminated, exterior grade, Baltic birch plywood and shall employ extensive internal bracing. Eighteen (18) 3/8"-16 threaded mounting/suspension points (4 each top, bottom and sides, 2 on back) shall be provided. [. . . ] All specifications are therefore subject to change without notice. FAX 508 234 8251 AS415e/2 pp info@eaw. com October 2001 www. eaw. com Printed in USA [. . . ]