User manual DSC PC4020 V3.3 REV1

[. . . ] ® PC4020 v3. 3 · Instruction Manual WARNING: This manual contains information on limitations regarding product use and function and information on the limitations as to liability of the manufacturer. The entire manual should be carefully read. FCC COMPLIANCE STATEMENT CAUTION: Changes or modifications not expressly approved by Digital Security Controls Ltd. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. [. . . ] Use the arrow keys (<>) to scroll to the "Quick Exit" display. To exit the menu, press [#]. 3. 3 Controlling Automatic Arming Daily Auto-arming Keypad Command: [*][6][access or master code][2] This option will allow the system to be automatically armed at the same time each day. In order for this function to work, you must both enable the Auto-Arm function, and program the Auto-Arm Time (follow the steps below). To enable auto-arming at the same time each day, perform the following: 1. Use the arrow keys (<>) to scroll to the "Auto Arm" display. Use the arrow keys (<>) to scroll to the "Auto Arm Time" display. This is the time at which the partition will automatically arm itself every day. Scheduled Auto-arming The panel can also be programmed to automatically arm according to a schedule. If you want more information regarding scheduling and your security system, please consult your installer. Use the arrow keys (<>) to scroll to the "Auto Arm" display. Use the arrow keys (<>) to scroll to "Schedule Arm. " To change the Schedule Arm setting, press [1] or [*]. This option, when enabled, will program the partition to automatically arm according to a schedule programmed by your installer. When this option is enabled, the partition will follow the auto disarming schedule programmed by your installer. When Auto Arming Occurs At the selected auto arm time, the keypad will beep once every 10 seconds to alert anyone on the premises that the system is about to arm. The bell or siren may also sound every 10 seconds, if programmed by your installer. To prevent the system from auto arming, press any key on the partition keypad during this pre-alert period. If desired, your installer can program the system so that a valid access code will be required to prevent the system from auto arming. Swiping an access card on one of the partition's readers--if installed--will also prevent auto arming. 3. 4 Setting the Time and Date Keypad Command: [Master Code][9] To set the time and date on the system, perform the following: 1. Use the keypad arrow keys (< >) to scroll to the display "Set System Time. " Press [*]. For instance, to program 3:51 p. m. , type in "1551. " 19 4. Next, use the keypad arrow keys to scroll to the display "Set System Date. " Press [*]. Once the date and time have been programmed, press [#] twice to return the partition to its normal disarmed state. 3. 5 Activating Door Chime Keypad Command: [*][4] When the door chime feature is enabled, the keypad will emit five quick beeps when a zone is opened or closed. [. . . ] Industrie Canada n'assure toutefois pas que le matériel fonctionnera à la satisfaction de l'utilisateur. Avant d'installer ce matériel, l'utilisateur doit s'assurer qu'il est permis de le raccorder aux installations de l'entreprise locale de télécommunication. Le matériel doit également être installé en suivant une méthode acceptée de raccordement. L'abonné ne doit pas oublier qu'il est possible que la conformité aux conditions énoncées ci-dessus n'empêchent pas la dégradation du service dans certaines situations. [. . . ]