Detailed instructions for use are in the User's Guide.
[. . . ] DellTM LCD TV Owner's Manual
Model W3202MC and W3706MC
w w w. c o m
Notes, Notices, and Cautions
NOTE: A NOTE indicates important information that helps you make better use of your TV. NOTICE: A NOTICE indicates either potential damage to hardware or loss of data and tells you how to avoid the
problem.
CAUTION: A CAUTION indicates a potential for property damage, personal injury, or death.
____________________
Information in this document is subject to change without notice. Reproduction in any manner whatsoever without the written permission of Dell Inc. [. . . ] Midnight Mode -- Evens out the large volume variations between voice and action scenes. If you select one of the following preset Equalizer Mode settings, the individual audio levels are automatically updated: · · · Music Theater Voice
D E L L C O N F I D E N T I A L P R E L I M I N A R Y 1 0 / 2 / 0 5 F O R P R O O F O N LY
30
Using the TV Menu
FILE LOCATION: C:\Documents and Settings\parksh2\¼YÝ¡ »¦³È\×¢¡æ\Dell\W3202_3706MC_EMEA_OM\MC_EMEA_proof
If you select Personal, you can adjust the individual audio levels, such as Treble, Bass and Balance. TV Out Volume -- Select Fixed if you want to adjust the volume using the remote or volume control on an attached audio receiver. Select Variable if you want to adjust the volume using the TV remote or front panel buttons. Using Variable adjusts the TV volume out not the volume on an attached audio receiver. Use Sound Mode to select Mono, Stereo, Dual1, Dual2, Nicam, Nicam-ST, Nicam-D1 and Nicam-D2. Use Mute to turn the TV sound on or off and use Speaker Out to turn on or off the sound from the speaker.
PIP/POP/PBP
You can view two active sources simultaneously using Picture-In-Picture (PIP), Picture-OutsidePicture (POP), or Picture-By-Picture (PBP). The remote control offers the following PIP/POP/PBP options: · Use the PIP button or the POP/ PBP button on the remote control to turn on and off PIP, POP, and PBP. · If you are in PIP, or PBP mode, use the SWAP button on the remote control to switch between the two windows. · Use the POS button on the remote to change which corner of the screen the PIP window appears. In the TV Menu, you can adjust the Transparency, the Size, and H (horizontal) and V (vertical) position of the PIP windows. When you are selecting the horizontal orientation, moves the window left and + moves the window to the right. When you are adjusting the vertical orientation, 0 is at the top of the screen and 100 is at the bottom of the screen. For POP, you can select from three different POP options: · · · POP1 -- One large POP window to the left and a smaller, centered window on the right. POP3 -- One large POP window to the left and three smaller, vertically-aligned windows on the right. POP12 -- One large, centered POP window surrounded by twelve smaller windows.
POP Scan Mode allows you to select Sequential or Float. Float mode plays the source for selected channels that appear in the windows. Sequential rotates through each window and plays all of the preselected channels. The rotation runs through all the available channels before it starts again at the lowest channel.
D E L L C O N F I D E N T I A L P R E L I M I N A R Y 1 0 / 2 / 0 5 F O R P R O O F O N LY
Using the TV Menu
31
FILE LOCATION: C:\Documents and Settings\parksh2\¼YÝ¡ »¦³È\×¢¡æ\Dell\W3202_3706MC_EMEA_OM\MC_EMEA_proof
www. dell. com | support. dell. com
PIP/POP/PBP Compatibility
When using PIP/POP/PBP you can select any of the input sources that appear in the PIP/POP/PBP windows. The only input sources that cannot work together are HDMI with HDMI, DVI with DVI, and HDMI with DVI. NOTE: When using POP the sub screen can select only the TV, AV1, AV2, AV4 and AV5 input sources.
Size
Size allows you to adjust the appearance of the image.
Use the following settings to adjust the aspect ratio: Standard -- Best selection for viewing digital TV, 16:9 or 22:9 DVD movies. 4:3 Aspect Ratio -- Best selection for viewing TV, VCR or 4:3 DVD movie. [. . . ] This box also appears during normal system operation if the video cable becomes disconnected or damaged.
4
Turn off your TV and reconnect the video cable; then turn on both your computer and the TV. If your TV screen remains blank, the problem may be with your computer or graphic card. See your computer documentation for more information.
Problems When Using the TV as a Monitor
NOTE: You can only connect your computer to the TV using a VGA connector.
Problem The picture is off-centered or too small Possible Solution button to enter the TV Menu, select Image Settings, and then select Auto Adjust. NOTE: Some older video cards may not support the resolution settings for the TV.
1 Use Auto Adjust to check the Image Settings. [. . . ]