User manual DEFINITIVE TECHNOLOGY XTR-60 V1.1

[. . . ] Bipolar speakers fill the room with sound creating the illusion multiple speakers surround the room. Our very first speaker was a bipolar design that set the tone for innovation within the industry. definitive engineers have packaged that same technology in a speaker that is only two inches thick. Using bipolars as surrounds or surround backs creates an experience that is larger than the room. [. . . ] The Mythos XTR series was designed to hang next to your thin wall-mounted television. A bracket has been supplied to secure your Mythos XTR loudspeaker to make wall mounting easier. Two cardboard mounting templates are provided; one for horizontal orientation and the other is for vertical mounting. Temporarily fix the template in the intended location with tape or pins. Drill screw holes in wall pre-drill the pilot-hole locations for mounting screws (not included). Use screws rated to hold securely in the wall material and have screw heads at least 0. *NOTE* Measure twice - Make sure the speaker clears the ceiling, adjacent walls, corners, beams, lighting fixtures and door/window frames. Leave at least 1" (25 mm) above or to the side of the speaker location to allow the speaker to slide onto the screws. Make sure the center of the template is centered with the TV screen's center points. If there is no stud behind the pilot-hole location, install wall anchors (not included) to secure the bracket screws. Firmly push the wire connector into the female receptacle on the back of the speaker. Line up the speaker so that the screws enter the center part of the + shaped channels; slide the speaker down so that the screw heads hold the speaker in place. It is possible to wall mount a XTR loudspeaker without the supplied bracket. Simply procure the appropriate screws for your installation to carry the speaker weight and follow these steps. Two cardboard mounting templates are provided; one for horizontal orientation and the other is for vertical mounting. Temporarily fix the template in the intended location with tape or pins. Drill screw holes in wall pre-drill the pilot-hole locations for mounting screws (not included). Use screws rated to hold securely in the wall material and have screw heads at least 0. *NOTE* Measure twice - Make sure the speaker clears the ceiling, adjacent walls, corners, beams, lighting fixtures and door/window frames. Leave at least 1" (25 mm) above or to the side of the speaker location to allow the speaker to slide onto the screws. Make sure the center of the template is centered with the TV screen's center points. If there is no stud behind the pilot-hole location, install wall anchors (not included) to secure the bracket screws. [. . . ] This warranty does not cover labor costs or damage to the Product caused by installation or removal of the Product. Definitive makes no warranty with respect to its products purchased from dealers or outlets other than Definitive Technology Authorized Dealer. The warranty is automatically void if: 1) The product has been damaged, altered in anyway, mishandled during transportation, or tampered with. 2) The product is damaged due to accident, fire, flood, unreasonable use, misuse, abuse, customer applied cleaners, failure to observe manufacturers warnings, neglect or related events. [. . . ]