User manual DAHON JETSTREAM EX 2009
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual DAHON JETSTREAM EX. We hope that this DAHON JETSTREAM EX user guide will be useful to you.
Manual abstract: user guide DAHON JETSTREAM EX2009
Detailed instructions for use are in the User's Guide.
[. . . ] Because each bicycle may handle differently, be sure to learn the proper braking technique (including brake lever pressure and bicycle control characteristics) and operation of your bicycle. This can be done by consulting your professional bicycle dealer and the bicycle's owners manual, and by practicing your riding and braking technique. These brake levers are equipped with a mode switching mechanism to make them compatible with cantilever brakes and Roller Brakes or V-Brakes with power modulator.
SI-6FD0A
SL-8S20 BL-IM65 CJ-8S20
Revo-shift Lever Brake Lever Cassette Joint
Disconnecting the shifting cable when removing the rear wheel from the frame
Disconnect the cable from the cassette joint when removing the rear wheel from the frame.
Installation of the shifting cable
Use a shifting cable with one inner cable drum.
the SIS-SP40 5. [. . . ] Turn the cable 60 to the hook.
Hook
counterclockwise and attach it
Adjusting the cassette joint
Revo-shift lever to 4 . Set theto be sure that the yellow setting lines on Check the cassette joint bracket and pulley are aligned at this time.
Yellow setting lines
(Lever side)
LOCK
Cable with one inner cable drum / SIS-SP40 (4 mm dia. )
Aluminum cap
Plastic cap
Technical Service Instructions
20 8S CJ- N
JA PA
1. Set the Revo-shift lever to 1 .
Set to 1
If cutting the outer casing, cut it near the end with the plastic cap while the cap is still attached. Then make the cut end perfectly round and attach the plastic cap.
Turn the cable 60
CJ-8S20
JAPAN
Set to 4
Plastic cap
slit in the cassette joint bracket, and then insert the end of the outer casing securely into the outer casing holder. The yellow setting lines on the cassette joint are located in two places. Use the one that is easiest to see.
20
Remove the plastic cap.
Cassette joint
LOCK
Be sure to read these service instructions in conjunction with the service instructions for the Inter-8 hub before use.
1. Loosen the cover fixing screw, and then remove the upper cover.
Cover fixing screw
Revo-shift lever side
CJ-8S
JAPA N
When bicycle is standing up
Should be straight
Cassette joint pulley
Make the cut end perfectly round. Replace the upper cover and tighten the cover fixing screw.
Tightening torque: 0. 1 0. 2 N·m {1 2 kgf·cm}
Cover fixing screw Gap in pulley Inner cable fixing nut Upper cover Guide
CJ-8S20
JAPAN
CJ-8S20
JAPAN
Guide
1 Turn the pulley
OK
Not OK
These service instructions explain how to use and maintain the Shimano bicycle parts which have been used on your new bicycle. For any questions regarding your bicycle or other matters which are not related to Shimano parts, please contact the place of purchase or the bicycle manufacturer.
Pulley hole
Pulley
the cable 10. to the frame with the outer casing
10 cm 10 cm 15 cm
®
NOTE:
Tighten 22. 2 mm
5 mm Allen key
2 mm Allen key or #14 spoke
For maximum performance we highly recommend Shimano lubricants and maintenance products. Parts are not guaranteed against natural wear or deterioration resulting from normal use.
Grip
Tightening torque: 6 8 N·m {60 80 kgf·cm}
Note: If reusing the cable, refer to steps 7 to 9 in "Installation of the shifting cable".
Outer casing bands
CJ-8S20
JAPAN
One Holland, Irvine, California 92618, U. S. A. Phone: +1-949-951-5003 Industrieweg 24, 8071 CT Nunspeet, The Netherlands Phone: +31-341-272222 3-77 Oimatsu-cho, Sakai, Osaka 590-8577, Japan
C Apr. Printed in Singapore
CJ-8S20
JAPAN
If the incorrect mode is selected it may cause either excessive or insufficient braking force to occur, which could result in dangerous accidents. Be sure to select the mode in accordance with the instructions given in the table below.
CJ-8S20
JAPAN
Pedaling becomes heavier
Indicator moves toward 8
Indicator
outer out from the 2. [. . . ] Printed in Singapore
CJ-8S20
JAPAN
If the incorrect mode is selected it may cause either excessive or insufficient braking force to occur, which could result in dangerous accidents. Be sure to select the mode in accordance with the instructions given in the table below.
CJ-8S20
JAPAN
Pedaling becomes heavier
Indicator moves toward 8
Indicator
outer out from the 2. Pull theholder casingcassette joint, outer then casing of the and remove the inner cable from the slit in the bracket.
Bracket
Upper cover
CJ
-8S
PA
JA
20
Cassette joint side
the end casing is 6. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE DAHON JETSTREAM EX
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual DAHON JETSTREAM EX will begin.