User manual CORSAIR ENTHUSIAST TX950W

[. . . ] If, prior to using the Product, you decide you are unwilling to agree to the terms of this agreement, promptly return the Product and the accompanying items (including written materials and binders or other containers) to Corsair Memory or the Corsair Memory authorized distributor from whom you obtained the Product and accompanying items. If you have already paid for the Product, provide us with your proof of purchase and we will refund the fees you have paid for these items to you. Limited Warranty and Limitation of Liability The Product is guaranteed for sixty (60) months from the date of delivery to the end-user against defects in materials or workmanship. [. . . ] The TX Series of highperformance power supplies make use of advanced technologies and components and are designed for years of reliable, trouble-free operation. Each Corsair TX Series power supply is backed by an industry-leading five-year warranty and 24/7 on-demand customer service. Ultra-quiet 120mm (140mm on TX750W, TX850W, and TX950W) double ball-bearing fan delivers excellent airflow at an exceptionally low noise level by varying fan speed in response to temperature. ⷠ80%+ energy efficiency at 20%, 50% and 100% load condition for less heat generation and lower energy bills · No more hassle of flipping that tiny red switch! ⷠDedicated single +12V rail offers maximum compatibility with the latest components. ⷠOver Current/Voltage/Power Protection, Under Voltage Protection, and Short Circuit Protection provide maximum safety to your critical system components. 5 year warranty and lifetime access to Corsair's legendary technical support and customer service. Note: The ATX power connector has a detachable 4-pin mechanism in order to support either a 24-pin or a 20-pin socket on the motherboard. Note: The EPS12V power connector has a detachable 4-pin mechanism in order to support either an 8-pin socket or a 4-pin "P4/12V" socket on the motherboard. Installation Before proceeding with installation, please read this manual in its entirety. Step A: Replacing your existing power supply If you are building a new system, skip to Step B. Disconnect the AC power cord from your wall outlet or UPS and from the existing power supply. Disconnect all the power cables from your video card, motherboard and all other peripherals. Follow the direction in your chassis manual and uninstall your existing power supply. Follow the directions in your chassis manual and install the power supply with the screws provided. The main 24-pin power cable attached to the power supply has a detachable 4-pin mechanism in order to support either a 24-pin or a 20-pin socket on the motherboard. [. . . ] Connect the AC power cord to the TX Series and turn it on by pushing the switch to the "I" position. You have completed installation of your new TX Series power supply and your system is ready to go!60950-1 TUV EN 60950-1 CB IEC 60950-1 WARNINGS Due to high voltages inside the power supply, under no circumstances should the power supply cover be removed. [. . . ]