User manual CLIFFORD SABRE 2

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual CLIFFORD SABRE 2. We hope that this CLIFFORD SABRE 2 user guide will be useful to you.


CLIFFORD SABRE 2 : Download the complete user guide (85 Ko)

Manual abstract: user guide CLIFFORD SABRE 2

Detailed instructions for use are in the User's Guide.

[. . . ] World-Class Auto Security TM Sabre II Owner's Manual Table of Contents Standard Features of the Sabre II . . 2 5 5 6 6 7 7 7 7 7 7 7 Selectable starter/ignition interrupt . Enhanced AutoArmingTM AutoArming enable/disable Visual acknowledgment . Remote controlled valet mode entry and exit Keyless entry in valet mode . [. . . ] See User-selectable features on pages 13-14. Visual acknowledgment: Five seconds after you exit the vehicle and close all the doors, the parking lights will flash twice to confirm that the AutoArming countdown is progressing. Then, 25 seconds later, the system will AutoArm. AutoArm & Lock: To ensure you can't accidentally lock your keys inside the car, the system is factory-set not to lock the doors upon AutoArming. To change this setting, see User-selectable features on pages 13-14. Instant AutoArming bypass: Prevents AutoArming when fueling and other times when you wish to temporarily bypass AutoArming. To activate Instant AutoArming Bypass, rapidly turn the ignition switch to "ON" then "OFF. " You'll hear a siren chirp to confirm that the system will not AutoArm. Your Sabre II will revert to its normal operating mode when you next start the engine. 7 UltraSecureTM Coded Valet Mode Your secret valet code In seconds, thieves can disable all other alarm brands by hotwiring the ignition and flicking an easy to find "hidden" valet switch. Your Sabre II system has safeguards that absolutely ensure a thief cannot enable the valet mode as a way of "turning off" your system. To enable valet mode, the driver must first enter a secret valet code on the PlainView switch. If a thief tries guessing your code, after three incorrect entries, the siren will sound and the system will not accept any further entries for two minutes. the code can be any number between 1 and 999, except those that contain a zero). Whenever the system is in valet mode, it overrides the AutoArming feature (see page 7) and all the security features are turned off. For instance, when having your car serviced, washed or parked by a valet. Your factory-set valet code is the single digit "2. " NOTE: If you temporarily lose the use of your remote controls, you can disarm the system by enabling valet mode. Definitions Digit: A digit is defined as any number from 1 to 9, inclusive. Valet code: A valet code may be 1 to 3 digits: A one-digit code=X=any number between 1-9 A two-digit code=XY=any number between 11-99 (excluding numbers with zeros) A three-digit code=XYZ=any number between 111-999 (excluding numbers with zeros) Remember, no code can have a zero. PlainView switch: A rocker switch mounted on the dashboard or console. The switch has three positions: 1. ) Latched 2. ) Center 3. ) Spring-loaded momentary. When you press the latched side, the switch remains in its pressed position. When you press the momentary side, the switch bounces back to the center position. Entering a digit: To enter a digit, you tap (press and release) on the momentary side of the PlainView switch the number of times corresponding to the numeral of the digit to be entered, followed by pressing to the latched side, then returning the switch to its center position. Entering a code: If your code has only one digit, enter the code as described in "Entering a digit. , " If your code has more than one digit, just repeat the above for each digit of your code. 8 To enable valet mode 1. Turn the ignition switch to its "ON" position or start the engine. Enter your secret valet code on the PlainView switch (the LED will turn on), then return the switch to its center position. You now have 10 seconds to press the latched position to enter valet mode. The system LED will glow continually for on-going visual confirmation of valet mode. To exit valet mode 1. Turn the ignition switch to its "ON" position or start the engine. The LED will turn off to confirm that the system is now in its normal operating mode. Setting your own secret valet code Since all Clifford systems have the same factory-set code, it is highly advisable that you set your own valet code. You may choose any 1-, 2-, or 3-digit code that does not have any zeros. [. . . ] Before sounding the siren a second time, the system automatically checks for another activated trigger to verify that an intrusion is in progress. Should the siren sound again, you will know for sure that someone is tampering with your vehicle. (To disable FACT, see User-selectable features on pages 13-14. ) How to interpret the LED status indicator The LED on your car's dashboard or console will inform you of the system status: LED Condition Off On Flashing Pause between flashes Meaning System is disarmed and in normal operating mode (i. e. , valet mode is off) Valet mode is on, the vehicle can be driven or serviced without having to disarm System is armed and protecting your vehicle Either a malfunction (see page 10) or an intrusion was attempted (see page 11) High-output InsigniaTM Siren All the siren electronics are in the system control unit rather than the siren itself. This protects them from heat, dirt and exposure to the elements (other alarm companies' sirens are far more susceptible to failure). [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE CLIFFORD SABRE 2




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual CLIFFORD SABRE 2 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.