User manual CLIFFORD ARROW 5

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual CLIFFORD ARROW 5. We hope that this CLIFFORD ARROW 5 user guide will be useful to you.


CLIFFORD ARROW 5 : Download the complete user guide (471 Ko)

Manual abstract: user guide CLIFFORD ARROW 5

Detailed instructions for use are in the User's Guide.

[. . . ] Arrow 5 Owner's Guide limited lifetime consumer warranty Directed Electronics, Inc. ("Directed") promises to the original purchaser to repair or replace with a comparable reconditioned model any Directed unit (hereafter the "unit"), excluding without limitation the siren, the remote transmitters, the associated sensors and accessories, which proves to be defective in workmanship or material under reasonable use during the lifetime of the vehicle provided the following conditions are met: the unit was professionally installed and serviced by an authorized Directed dealer; the unit will be professionally reinstalled in the vehicle in which it was originally installed by an authorized Directed dealer; and the unit is returned to Directed, shipping prepaid with a legible copy of the bill of sale or other dated proof of purchase bearing the following information: consumer's name, telephone number and address; the authorized dealers name, telephone number and address; complete product description, including accessories; the year, make and model of the vehicle; vehicle license number and vehicle identification number. All components other than the unit, including without limitation the siren, the remote transmitters and the associated sensors and accessories, carry a one-year warranty from the date of purchase of the same. This warranty is non-transferable and is automatically void if: the original purchaser has not completed the warranty card and mailed it within ten (10) days of the date of purchase to the address listed on the card; the unit's date code or serial number is defaced, missing or altered; the unit has been modified or used in a manner contrary to its intended purpose; the unit has been damaged by accident, unreasonable use, neglect, improper service, installation or other causes not arising out of defects in materials or construction. [. . . ] If the internal battery is discharged, the arm/disarm chirps are muted. If a self-powered smart siren has been added to your system, please refer to the selectable siren sounds feature in the User Selectable Features grid. Once in programming mode, press mitter to begin playback of the available sounds. Press on the PlainView 2 Valet switch while playing the desired while playing the desired sound to on the trans- sound to add that sound; press delete that sound. 14 diagnostics The microprocessor at the heart of your security system is constantly monitoring all of the switches and sensors that are connected to it. It detects any faulty switches and sensors and prevents them from disabling the entire system. The microprocessor will also record and report any triggers that occurred during your absence. arming diagnostics If the system is armed while an input is active (door open, sensor triggering, etc. ) the unit will chirp twice when arming and then four more times five seconds later. The security system will ignore the input that was active when the system was armed, until the input goes away. For example, if your vehicle has interior light exit delay, and you arm the system before the interior light goes out, you may hear Bypass Notification chirps. Once the light shuts off, however, the doors are monitored normally. disarming diagnostics Extra disarm chirps are the Tamper Alert. If three chirps are heard when disarming, the system was triggered in your absence. If three chirps are heard, the LED status indicator will indicate which zone was involved (see the Table of Zones section). Refer to the Multiple Event Total Recall section of this guide. © 2 0 0 3 d i re c t e d e l e c t ro n i c s , i n c . 15 arm/disarm diagnostic chart Action Arm Arm Chirps 2 4 Light Flashes 2 4 Description System armed System armed with hood/ trunk active and bypassed (zones 5 and 6) System armed with door active and bypassed (zone 4) System armed with sensor active and bypassed zones 3 and 8 System disarmed System disarmed with tamper alert System disarmed with low battery warning Arm Arm 2 (5 sec. ) 4 2 (10 sec. ) 4 2 (5 sec. ) 4 2 (10 sec. ) 4 Disarm Disarm Disarm 1 3 5 1 3 5 table of zones The zone number is the number of LED flashes used by the system to identify a specific input. The standard input assignments are listed below, along with spaces to write in any optional sensors or switches you have had installed. If the Warning Zone response is triggered, the LED will not report it. Zone - Number of LED Flashes 3 Description Instant trigger - a heavier impact detected by the shock sensor Door switch trigger Instant trigger - often used for hood/trunk pinswitches Ignition trigger Instant trigger - for optional sensors System Power Reset Dealer-Installed Options 4 5 7 8 10 16 anti-code grabbing (ACG) This unit features Anti-Code Grabbing (ACG) with Random Code Encryption. This means the receiver and transmitters each use a mathematical formula called an algorithm to change their code each time the transmitter is used. This technology has been developed to increase the security of the unit. The control unit knows what the next codes should be. high frequency Your system transmits and receives at 433 MHz. This provides a cleaner spectrum with less interference and a more stable signal. smart power up II This security system will store its current state to non-volatile memory. If power is lost and then reconnected the system will recall the stored state from memory. This means if the unit is in Valet Mode and the battery is disconnected for any reason, such as servicing the car, when the battery is reconnected the unit will still be in Valet Mode. This applies to all states of the system including arm, disarm, and Valet Mode. © 2 0 0 3 d i re c t e d e l e c t ro n i c s , i n c . 17 power saver mode Your system will automatically enter Power Saver Mode while armed or in Valet Mode, after a period of time in which no operation has been performed. This lowers the current draw on the vehicle's battery and prevents the system from draining the battery. [. . . ] of the PlainView 2 Valet 1-9 times, and then press to enter the number into the system. You will hear two chirps. Wait for two siren chirps after a five second pause or five seconds after the last digit has been entered if using less than four digit code number. 6. 28 PIN Code Confirmation Procedure Begin this procedure within 15 seconds of finishing the programming sequence or the new code will not be set. Press and hold for three seconds. LED turns on: New PIN code is learned and programming is complete. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE CLIFFORD ARROW 5




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual CLIFFORD ARROW 5 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.