User manual CLIFFORD 20
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual CLIFFORD 20. We hope that this CLIFFORD 20 user guide will be useful to you.
Manual abstract: user guide CLIFFORD 20
Detailed instructions for use are in the User's Guide.
[. . . ] World-Class Auto Security
TM
concept
20
Owner's Manual
All Concept Series systems are covered by one or more of the following Clifford Electronics patents: 4, 158, 874; 4, 233, 642; 4, 327, 444; 4, 383, 242; 4, 430, 685; 4, 845, 464; 4, 887, 064; 4, 890, 108; 4, 922, 224; 4, 997, 053; 5, 081, 667; 5, 146, 215; 5, 157, 375 and other patents
Table of Contents
Standard Features of the Concept 20 . 16
1
Table of Contents (cont. )
How to interpret the LED status indicator . 18
Smart prior intrusion attempt alert
High-output InsigniaTM Siren . 2324
2
Standard Features of the Concept 20
Lifetime Warranty --For as long as you own the vehicle, Clifford will
repair or replace the control unit and remote controls free of charge (see warranty card for full details).
FACTTM--False Alarm Control and Test -- One of many patented Clifford
innovations, FACT absolutely, positively ends recurring false alarms.
A Pair of 4-Button/12-Channel Remote Controls --Fingertip
command from a
typical range of 100 feet.
AntiScanTM -- Some car thieves still use "scanners" that transmit one
digital code after another until they hit the one code that disarms the alarm. [. . . ] You may choose any 1-, 2-, or 3-digit code that does not have any zeros. Simply write down the 1-to-3 digit code you wish to use (remember, no zeros in the code), then refer to the User-selectable features section on pages 20-24.
Example
Let's say you want to set your valet code to 31. From the Table of user-selectable features on pages 23 and 24, you would note that the "set a new secret valet code" feature is in column 3, row 5. Enter program mode by turning on the ignition, entering your current valet code, then pressing the PlainView switch to its momentary side for 3 seconds until you hear a chirp. Select column 3 by moving the switch between latched and center 3 times, i. e. : latched, center, latched, center, latched, center. After a brief pause, you will hear 3 chirps to confirm that you have selected feature column 3. Select row 5 by pressing and releasing the momentary side of the switch 5 times. To help you count, you will hear a chirp each time you press the momentary side. To enter 31 as your new code, you would press the switch in this manner: momentary, momentary, momentary, latched (you'll hear 3 chirps to confirm the first digit), momentary, latched (1 chirp to confirm the second digit), center. Wait 3 seconds until you hear 2 chirps, indicating the new code has been accepted. Turn off the ignition to exit program mode (you'll hear a 3-chirp confirmation). VERY IMPORTANT: You must immediately test your new secret valet code: Turn on the ignition, enter your new code, then flip the switch to its latched position. If it does not, the new code you programmed and the one you just entered do not match. In such a case, the system will revert to the previous code.
Remote controlled valet mode entry and exit You can even enable or exit valet mode with your remote control simply by transmitting channel 9 (LevelShift twice, then button 1). In addition to the above indications, two parking light flashes will confirm that you have remotely enabled valet mode, while a single flash confirms exiting of valet mode. Keyless entry in valet mode Even if valet mode is enabled, you can still remotely control the convenience features. For instance, simply press button 1 (channel 1) as if you were disarming and the doors will unlock (indicated by one parking light flash) and the interior lights will turn on.
15
Press button 1 again and the doors lock (confirmed by two flashes). You can also use the other channels to activate options such as a remote trunk release or remote engine starting.
FACTTM-- False Alarm Control and Test With FACT, you'll never experience repeated false alarms. If the Insignia Siren goes off, DO NOT remotely disarm the system; allow it to run for the full siren duration. Before sounding the siren a second time, the system automatically checks for another activated trigger to verify that an intrusion is in progress. Should the siren sound again, you will know for sure that someone is tampering with your vehicle. (To disable FACT, see User-selectable features on pages 20-24. ) Selectable starter/ignition interrupt At the time of installation, you can select whether your Concept 20 interrupts the starter line or the ignition line. [. . . ] If you wait more than 10 seconds, the system automatically jumps back to the "Feature Select" position. This is the "stand-by" position: ready for entry of a new programming selection. If no action is taken for the next 60 seconds, the system automatically exits program mode, perfect if you program while driving or if you forget to turn off the ignition.
Adding new remote controls For other drivers in your family, or if you wish to control Concept systems on your other cars with the same remote control, you can buy additional remote controls from any Clifford Dealer and program them into the system yourself. Each Concept 20 will respond to as many as four 12-channel remote controls. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE CLIFFORD 20
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual CLIFFORD 20 will begin.