User manual CASIO KL-7400

[. . . ] E KL-7400 User's Guide Be sure to read the Safety Precautions contained in this manual before trying to use the printer for the first time, and always keep this manual on hand for future reference. RJA520036-001V01 GUIDELINES LAID DOWN BY FCC RULES FOR USE OF THE UNIT IN THE U. S. A. (not applicable to other areas). NOTICE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ] " " TOO SHORT TO CUT!" appears, see pages 53, 56 for information about what you need to do. Shows the starting number. The number that appears here depends on the label you created. If you make a mistake and input the wrong number, delete the current number and re-input. Input the text for the COMMENT 2 box, and then press SET. Here we will input "Receipt". While inputting text in the Numbering Mode, you can also change the DIRECTION setting (page 29), MIRROR setting (page 29), and the MARGINS setting (page 29). Note, however, that NONE cannot be selected for the MARGINS setting at this time. Important! Make sure that cut tape does not pile up in the area around the tape outlet. Tape building up around the tape outlet can cause the outlet to become blocked, causing a tape jam and malfunction of the printer. Use the cursor keys to select the number style you want, and then press SET. Here we will select No. 1. 9. Use and and to select PRINT, and then press SET. Use the start and end numbers to make sure that they are correct, and then press SET. Here we want to print one set of labels numbered 15, 16, and 17, so we will specify 3 for the number of labels to be printed. For the number of labels to be printed, you can specify a value in the range of 1 to 100. 25 E Creating and Printing a Tape Label with a Logo Your printer comes with 60 built-in logos that you can incorporate into your tape labels quickly and easily. 5. appears on the right side of the display when the logo text runs off the right side of the display. Selecting a logo that has the indicator will cause the logo to scroll automatically in order to display all of the text. The language you select here does not affect the display language setting. The display will return automatically to the logo selection screen after logo scrolling is complete. To return to the logo selection screen while scrolling is in progress, press ESC. Important! You can incorporate built-in logos into tape labels that are printed using 12mm, 18mm or 24mm tape only. I To create and print a label with a logo 1. You also could press LOGO in step 2 or 3 to enter the Logo Mode. 8. The language you select here does not affect the display language setting. Example The following print contents change in accordance with the currently selected language. English Spanish German 4. For details, see "Built-in Logos" on page 59. French Italian Swedish 10. If you want to print a mirror image, press select MIRROR. and then use and to 11. Use the number keys (or and then press . and ) to specify the number of copies, You can specify a value from 1 to 100 for the number of copies. Creating and Printing an Original (Free Design) Tape Label This section describes what you can do with the Free Design mode of the printer, which lets you design your own tape labels. [. . . ] You are attempting to perform a paste operation when there is no text copied. CHECK THE TAPE CARTRIDGE! 40 NO INPUT TEXT! You are attempting a print or preview operation when there is no text input. You are attempting to perform a copy operation when there is nothing input. Input text first. 18, 23 The tape became jammed during printing. [. . . ]