User manual CANON LV-7297S BROCHURE

[. . . ] Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Notes for Notational . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Functional Execution Command Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Image Command Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Therefore, when AC Power Off the Projector, the value will return to the original setting. (For Standby mode, this value stays) Only valid when it is in the usual Power On state. Acceptable Unacceptable "000" [CR] "Error Code" [CR] Details Response 8. 4. 10. CF_FILM Command Command %1 "CF_FILM_%1" [CR] "ON" --------------- Film Mode ON "OFF" -------------- Film Mode OFF Set / Cancel for Film Mode. Therefore, when AC Power Off the Projector, the value will return to the original setting. (For Standby mode, this value stays) Only valid when it is in the usual Power On state. Acceptable Unacceptable "000" [CR] "Error Code" [CR] Details Response 8. 4. 11. CF_IMAGE Command "CF_IMAGE_%1" [CR] "STAND" -------------------"REAL" ---------------------"CINEMA" -----------------"BLACKBOARD" --------"CUSTOM1" --------------Standard mode High contrast mode Cinema mode Blackboard (Green) mode Custom mode %1 Details Select Image mode. (When it is in usual Power On state, this is valid) Parameter "CUSTOM1" is the same as selecting "Custom" on OSD menu The value set by this Command is stored in EEEPROM, when AC Power Off the Projector the value will be valid. Acceptable Unacceptable "000" [CR] "Error Code" [CR] Response 8. 4. 12. CF_IMAGEADJ Command Command %1 "CF_IMAGEADJ_%1" [CR] "RST" -------------- Reset Image adjustment "STR1" ------------ Store current Image adjustment to Custom mode Reset / Store for Image adjustment. "UP" ---------------------- Vertical Position setting value +1 "DN" -------------------- Vertical Position setting value ­1 Set Vertical Position PC signal. (When it is in usual Power On state, this is valid) The value set by the command will not be saved to the Projector. Therefore, when AC Power Off the Projector, the value will return to the original setting. (For Standby mode, this value stays) Acceptable Unacceptable "000" [CR] "101" [CR] ---- Input is Video %1 Details Response 8. 5. 6. CF_DDOTS Command Command "CF_DDOTS_%1" [CR] "0100 ­ nnnn" --------- Directly set Display Dots setting value "nnnn" is maximum value. "UP" ---------------------- Display Dots setting value +1 "DN" ---------------------- Display Dots setting value ­1 Set Display Dots PC signal. (When it is in usual Power On state, this is valid) The value set by the command will not be saved to the Projector. Therefore, when AC Power Off the Projector, the value will return to the original setting. (For Standby mode, this value stays) Acceptable Unacceptable "000" [CR] "101" [CR] ---- Input is Video %1 Details Response 8. 5. 7. CF_DLINE Command Command "CF_DLINE_%1" [CR] "0100 ­ nnnn" --------- Directly set Display Line setting value "nnnn" is maximum value. "UP" ---------------------- Display Line setting value +1 "DN" ---------------------- Display Line setting value ­1 Set Display Line PC signal. [. . . ] "NOR" ------- Fan Control speed Normal "?" [CR] Expand Serial Command Functional Specification Page 39 of 41 9. 11. 10. CR_KEYDIS Command Command Details "CR_KEYDIS" [CR] Get RC / KEY status Acceptable Response %a Unacceptable "000_%a" [CR] "NONE" -------- Both RC & KEY are available "RC" ------------- RC is key locked "KEY" ----------- KEY is key locked "?" [CR] 9. 11. 11. CR_TERMINAL Command Command Details "CR_TERMINAL" [CR] Get Terminal setting Acceptable Response %a Unacceptable "000_%a" [CR] "COMPUTER" ------- Computer Input mode "MONITOR" ---------- Monitor Output mode "?" [CR] 9. 11. 12. CR_STANDBYMODE Command Command Details "CR_STANDBYMODE" [CR] Get Standby mode setting Acceptable Response %a Unacceptable "000_%a" [CR] "ECO" ------------- Eco mode "NORMAL" ------ Normal mode "?" [CR] 9. 11. 13. [. . . ]