User manual BUSH A642N

[. . . ] 26"/32"/42" A626N/A632N/A642N INSTRUCTION MANUAL TABLE OF CONTENT FOR YOUR SAFETY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 PRECAUTIONS AND REMINDERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 PACKAGE CONTENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Using a HDMI-DVI cable, connect the DVI end to your DVD player and the HDMI end to the HDMI Input at the rear of the HDTV. Select HDMI using the SOURCE button on the remote, side of the HDTV, or directly by pressing the HDMI button on the Remote Control. NOTE Refer to your DVD player user manual for more information about the video output requirements of the product. Connection to an alternate audio player is required for audio output. Connecting Your DVD Player Using HDMI DVD players that have a digital interface such as HDMI (High Definition Multimedia Interface) should be connected to the HDMI input of the LCD HDTV for optimal results. 16 BUSH | HD Ready LCD TV | User Manual | Customer Helpline 0845 604 0105 Using Component Video Connecting your DVD Player (Better) 26"/32" 7. Select YPbPr using the SOURCE button on the remote, side of the HDTV or directly by pressing the YPbPr button on the Remote Control. NOTE Refer to your DVD player user manual for more information about the video output requirements of the product. Using SCART Connecting your DVD Player (Good): 42" 26"/32" 1. Connect the Pr (red colour) connector on your DVD player to the corresponding Pr (red colour) connector in the Component at the rear of the HDTV. Connect the Pb (blue colour) connector on your DVD player to the corresponding Pb (blue colour) connector in the Component group at the rear of the HDTV. Connect the Y (green colour) connector on your DVD player to the corresponding Y (green colour) connector in the Component group at the rear of the HDTV. Using an audio cable (red and white connectors), connect the cable to the audio output connectors associated with the Component output on your DVD player and connect the other end to the audio connectors associated with the Component input at the rear of the HDTV. Connect the SCART socket of your DVD player to the SCART socket of the HDTV. Select AV using the SOURCE button on the remote, side of the HDTV, or directly by pressing the VIDEO button on the Remote Control. BUSH | HD Ready LCD TV | User Manual | Customer Helpline 0845 604 0105 17 Using Composite (AV) Video Connecting your DVD Player (Good) 1. Connect the SCART socket of your VCR or Video Camera to the SCART socket of the HDTV. Select AV using the SOURCE button on the remote, side of the HDTV or directly by pressing the VIDEO button on the Remote Control. 1. Connect the Video (yellow colour) connector on your DVD player to the Video (yellow colour) connector in the AV group. Connect the R (red colour) and L (white colour) audio connectors on your DVD player to the corresponding R (red colour) and L (white colour) audio input connectors in the AV group. Select AV using the SOURCE button on the remote, side of the HDTV or directly by pressing the VIDEO button on the Remote Control. Using SCART Connecting Your VCR or Video Camera 26"/32" NOTE Refer to your VCR or Video Camera user manual for more information about the video output requirements of the product. Connecting to a PC 26"/32" 42" 42" 1. Connect a 15-pin D-Sub RGB (VGA) cable to the RGB output of your PC and the other end to the VGA input at the rear of the HDTV. Connect the Audio Out on your computer to the AUDIO input at the rear of the HDTV. Select VGA using the SOURCE button on the remote, side of the HDTV or directly by pressing the PC button on the Remote. BUSH | HD Ready LCD TV | User Manual | Customer Helpline 0845 604 0105 18 NOTE For the best picture quality when connecting a computer through VGA, set your computer timing mode to native resolution of panel. Please refer to the PC or graphic card's user guide for additional information on how to set the timing mode and the video output requirements of the product. Use the Navigation Ring to move around to select, adjust or confirm an item in the OSD (On Screen Display) menu. Adjust the items including Picture, Sound, TV, Features, and Parental. [. . . ] *Select the TV mode to ensure your remote control is set in the TV mode. No power No picture Good picture but no sound Good sound but poor colour Poor picture Snowy picture and noise Horizontal dotted line Television not responding to remote control 28 BUSH | HD Ready LCD TV | User Manual | Customer Helpline 0845 604 0105 GLOSSARY HDTV HDTV displays are technically defined as being capable of displaying a minimum of 720p or 1080i active scan lines. HDMI Inputs High-Definition Multimedia Interface Audio / Video Inputs Located on the rear of the receiver, these connectors (RCA phono type plug) are used for the input of audio and video signals. Designed for use with VCRs (or other accessories) in order to receive higher picture resolution and offer sound connection options. Menu An on-screen listing of features shown on the TV screen is made available for user adjustments. [. . . ]