Detailed instructions for use are in the User's Guide.
[. . . ] LIFESTYLE® DVD Home Entertainment Systems
Operating Guide October 30, 2001
AM259776_01_V. pdf
Important Safety Information
WARNING: To reduce the risk of fire or electric shock, do not expose the system to rain or moisture.
CAUTION
RISK OF ELECTRICAL SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED PERSONNEL.
AVIS
RISQUE DE CHOC ÉLECTRIQUE NE PAS OUVRIR AFIN DE PRÉVENIR UN CHOC ÉLECTRIQUE NE PAS ENLEVER LE COUVERCLE ARRIÈRE. IL NE SE TROUVE À L'INTÉRIEUR AUCUNE PIÈCE POUVANT ÊTRE RÉPARÉE PAR L'USAGER. S'ADRESSER À UN RÉPARATEUR COMPÉTENT.
These CAUTION marks are located on the enclosure of your LIFESTYLE® media center and on the enclosure of your Acoustimass® module: The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the system enclosure that may be of sufficient magnitude to constitute a risk of electric shock. [. . . ] Chapter Preset or Track Key in a preset number on the keypad and press
Enter
.
Setting a station preset
Your LIFESTYLE® media center can store up to 25 AM and 25 FM stations. Using the remote, tune to a radio station you want to store as a preset. The display shows, STORE TO PRESET <number>,
where <number> is the next lowest available preset number. If you do not want to store to this preset number, press Preset
Store
Channel Chapter Preset Track
up or down to change the preset number.
4.
Press
again to save the preset. The display shows, STATION SAVED to <number>.
Note: If you attempt to store more than 25 AM or 25 FM stations, the media center will display the message, ALL PRESETS FULL . . . ERASE A PRESET Note: To change an existing preset, first you must erase the preset station and then store a new station to that preset number.
16
October 30, 2001
AM259776_01_V. pdf
Listening to AM/FM Radio Erasing a station preset
1. The display shows, PRESET <number> ERASED.
Erase
Selecting a preset station
You can select preset stations using the remote control or the on-screen settings menu. To select a preset with the remote control: · Key-in the preset number on the numerical keypad, or · Press Preset
Channel Chapter Preset Track
up or down to change the preset number
To select a preset using the settings menu: 1. Press Press Press Press
FM/AM Settings
on the remote and select the FM or AM source. / to step through the preset stations.
AM259776_01_V. pdf
October 30, 2001
17
Playing External Sources Controlling external sources
Follow the instructions in your LIFESTYLE® system Installation Guide for connecting an external component. If you like, you can program your new LIFESTYLE® remote to control most brands of TVs, VCRs, and cable/satellite control boxes. An infrared (IR) emitter is included behind the media center display to communicate with any component your remote is programmed to control.
Programming your LIFESTYLE® remote to control your TV
If you want to control your TV with your LIFESTYLE® remote control, you can program it to operate your brand of TV using the system settings menu. The first 4-digit device code is shown.
TV
Press TV Power
Power
on the LIFESTYLE® remote control to see if the TV turns off.
9.
If you cannot turn off your TV, press to choose the next device code, and press the TV Power button again. Test each device code until you find one that turns your TV off and on again when pressing the TV Power button.
Programming your LIFESTYLE® remote to control your VCR
If you want to control your VCR with your LIFESTYLE® remote control, you can program it to operate your brand of VCR using the system settings menu. until your VCR brand name is
18
October 30, 2001
AM259776_01_V. pdf
Playing External Sources
7. The first 4-digit device code is shown.
VCR
Press VCR Power off.
Power
on the LIFESTYLE® remote control to see if the VCR turns
9.
If you cannot turn off your VCR, press to choose the next device code, and press the VCR Power button again. Test each device code until you find one that turns your VCR off and on again when pressing the VCR Power button.
Programming your LIFESTYLE® remote to control your cable/satellite box
If you want to control your cable/satellite box (connected to the AUX input) with your LIFESTYLE® remote control, you can program it to operate your brand of cable/satellite box using the system settings menu. The first 4-digit device code is shown.
AUX
Press AUX Power
Power
on the LIFESTYLE® remote control to see if the cable/satel-
lite box turns off. If you cannot turn off your cable/satellite box, press to choose the next device code, and press the AUX Power button again. Test each device code until you find one that turns your cable/satellite box off and on again when pressing the AUX Power button.
Turning the system on and selecting the source
Press the Tape, VCR, or AUX button on the remote or press Source on the media center until the desired component is selected. This turns your system on and selects the component connected to that input. Note: Selecting an external source turns the system on in surround (5-speaker) mode. [. . . ] · Press Surround + · Make sure the video sound source is stereo and surround-encoded, and the component used (TV, VCR, etc. ) is stereo.
Surround speakers are too · In 5-speaker mode, press Surround . loud · Make sure that the left and right front speakers are connected to the front speaker jacks (blue) and the left and right surround speakers are connected to the surround speaker jacks (orange). Remote control is inconsistent or does not work · Check batteries and their polarity (+ and ). · Move the remote (or the media center) a few feet to avoid an area of "dead spots. " See note under "The remote control" on page 7. [. . . ]