User manual BOSCH WIA24200EE

[. . . ] Washing machine en Installation and operating instructions Table of contents Operating instructions General safety information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Environmental protection / conservation tips . . . . . . . . . . . . . . . . . . . . . . . . . 4 Your new washing machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Before the first wash . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Leave the washing machine door open so that the inside of the washing machine can dry. Turn off the tap. Rinsestop If the spin function was deactivated at the start of the wash cycle, (no final spin = laundry remains in last rinsing water), the washing programme is automatically stopped after the final rinse. In order to empty the rinsing water and, if required, spin the laundry: Press the B (Spin) button repeatedly until the desired spin speed is set. The programme has ended when <<<< appears in the display panel. i The maximum spin speed depends on the selected washing programme. If you do not wish to spin the laundry: Set the programme selector to [ (Empty). Leave the washing machine door open so that the inside of the washing machine can dry. Changing the programme You have selected the wrong programme by mistake: Reselect the programme. The new programme starts from the beginning. 14 Adding laundry If you want to add subsequent items of laundry after the programme has started, press and hold the Inicio/ Pausa (Start/Pause) button until ~`-- appears in the display panel. ~`-- and the remaining time appear alternately while the programme is paused. Press the Inicio/ Pausa (Start/Pause) button to continue with the programme. Note: If the water level and/or the temperature is high or if the machine is in a spin cycle, the washing machine door remains locked for safety reasons. Press and hold the Inicio/ Pausa (Start/Pause) button until <<<< appears in the display panel and all three programme progress indicator lamps light up. To continue the programme, press the Inicio/ Pausa (Start/Pause) button. Press and hold the Inicio/ Pausa (Start/Pause) button until ~`-- appears in the display panel. For washing programmes at high temperatures: ­ Allow laundry to cool: Select q/B (Rinse + Spin) ­ Select Inicio/ Pausa (Start/Pause). For programmes at low temperatures: ­ Select q/B (Rinse + Spin) or [ (Empty). ­ Select Inicio/ Pausa (Start/Pause). Programme termination Reset function: ­ Using the reset function you can return to the original settings. To do this, press and hold the Inicio/ Pausa (Start/Pause) button until <<<< appears in the display panel and the three programme progress indicator lamps light up. 15 Cleaning and care Safety information Risk of electric shock You must first disconnect the appliance from the mains. Risk of scalding Hot detergent solution must be cooled before being drained. Housing and control panel Washing drum ­ Remove detergent residue immediately. ­ Do not clean with a water jet. ­ Remove any foreign objects from the drum and rubber seals. ­ Leave the washing machine door open so that the drum can dry out. ­ Use chlorine-free cleaning agents; observe the manufacturer's instructions. Never use steel wool. Detergent drawer If there are detergent or care product residues: Pull out the detergent drawer as far as possible. [. . . ] Note the water pressure in the mains supply: ­ The water pressure should be between 50-900 kPa (0. 5-9 bar) (at least 8 litres of water flow out per minute when the tap is turned on). ­ If the water pressure is higher than this, a pressure reducing valve must be installed. Connect the supply hose to the cold water tap with ¾" connection. After connecting the water supply hose: ­ Open the water tap carefully, checking the leak tightness of the connection points. [. . . ]