User manual BOSCH SMI 40D06EU/25 SUPPLEMENT

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual BOSCH SMI 40D06EU/25. We hope that this BOSCH SMI 40D06EU/25 user guide will be useful to you.


BOSCH SMI 40D06EU/25 SUPPLEMENT: Download the complete user guide (740 Ko)

Manual abstract: user guide BOSCH SMI 40D06EU/25SUPPLEMENT

Detailed instructions for use are in the User's Guide.

[. . . ] To ensure optimal and regular performance of your appliance please read this instruction manual carefully. It will enable you to navigate all processes perfectly and most efficiently. To refer to this manual any time you need to, we recommend you to keep it in a safe place. We wish you much joy with your new appliance. The following symbols are used in this user manual: Important information concerning your personal safety and information on how to avoid damaging the appliance. [. . . ] With the selection of this function the inflow of rinse aid and salt from each respective supply container is automatically deactivated and also the indicator lights for salt and rinse aid are deactivated. Select the "3 IN 1 function " before the start of a washing programme. Once this function is selected (indicator light illuminated) it will remain active also for the following washing programmes. With the use of the "3 IN 1 function", the cycle durations may change. Once the programme is running, the "3 IN 1 function " can NO longer be changed. If you want to exclude the "3 IN 1 function " you have to cancel the programme setting and then deactivate the "3 IN 1 function ". In this case you have to set a washing programme (and desired options) again. 22 Use of detergent Activation/deactivation of the 3 IN 1 function Press the 3 IN 1 button: the corresponding indicator light illuminates. To deactivate the function press the 3 IN 1 button again: the indicator light turns off. · The activation/deactivation of the rinse aid dispenser can only be possible with the "3 IN 1 function" active. Press simultaneously buttons B and C, until the lights of buttons A , B, and C start flashing. Press button B, the lights of buttons A and C turn off while the light of button B goes on flashing: the end of programme indicator light illuminates, indicating that the rinse aid dispenser has been activated. Press the On/Off button again; the programme will start from the point at which it was interrupted. End of the washing programme · The dishwasher will automatically stop. Open the dishwasher door, leave it ajar and wait a few minutes before removing the dishes; in this way they will be cooler and the drying will be improved. Unloading the dishwasher 25 Unloading the dishwasher · Hot dishes are sensitive to knocks. The dishes should therefore be allowed to cool down before removing from the appliance. · Empty the lower basket first and then the upper one; this will avoid water dripping from the upper basket onto the dishes in the lower one. · Water may appear on the sides and the door of the dishwasher as the stainless steel will eventually become cooler than the dishes. When the washing programme has finished, it is recommended that the dishwasher is unplugged and the water tap turned off. Care and cleaning Cleaning the filters The filters must be checked and cleaned from time to time. The dishwasher filter system comprises a coarse filter (A), a microfilter (B) and a flat filter. Unlock the filter system using the handle on the microfilter, and remove the filter system. 26 Care and cleaning 3. Turn the handle about 1/4 a turn anticlockwise and remove the filter system. Take hold of the coarse filter (A) by the handle with the hole and remove from the microfilter (B). [. . . ] Please take care when installing the water inlet hose: · The electrical cable for the safety valve is in the double-walled water inlet hose. Do not immerse the water inlet hose or the safety valve in water. Installation 35 · If water inlet hose or the safety valve is damaged, remove the mains plug immediately. · A water inlet hose with safety valve must only be replaced by a specialist or by the Service Force Centre. · Place the water inlet hose in such a way that it is never higher than the bottom edge of the safety valve. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE BOSCH SMI 40D06EU/25




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual BOSCH SMI 40D06EU/25 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.