User manual BOSCH KGF49PI40

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual BOSCH KGF49PI40. We hope that this BOSCH KGF49PI40 user guide will be useful to you.


BOSCH KGF49PI40 : Download the complete user guide (2149 Ko)

Manual abstract: user guide BOSCH KGF49PI40

Detailed instructions for use are in the User's Guide.

[. . . ] Safety and warning information Before you switch ON the appliance please read the operating and installation instructions carefully!They contain important information on how to install, use and maintain the appliance. The manufacturer is not liable if you fail to comply with the instructions and warnings. The tubes of the refrigeration circuit convey a small quantity of an environmentally friendly but flammable refrigerant (R600a). [. . . ] As soon as the refrigerator and the app are connected, the display shows on. Use Add to confirm the connection between the app and the refrigerator. If the refrigerator is not automatically displayed, click on Add appliance in the app and follow the instructions. If the connection has failed, please check whether the mobile device is connected to the home network (WLAN). When the display shows Er, reset the Home Connect settings and perform set-up again from the beginning. Verify signal strength You should verify the signal strength if no connection can be established. Press the super button and the lock/ alarm off button simultaneously to open the Home Connect menu. Button operation is locked if only the lock/alarm off button is pressed for a longer period. In the second display, a value appears between 0 (no reception) and 3 (full reception). If the signal strength is too low, the connection could be interrupted. Place the router and the refrigerator closer together, ensure that the connection is not disturbed by shielding walls or install a repeater to strengthen the signal. resetting Home Connect settings If the connection process does not work or you would like to log the refrigerator on to a different home network (WLAN), you can reset the Home Connect settings: 1. Press the super button and the lock/ alarm off button simultaneously to open the Home Connect menu. Button operation is locked if only the lock/alarm off button is pressed for a longer period. Press the °C button repeatedly until the displays rE and oF are shown. If the display shows Er, start the reset again or call customer service. If you contact Customer Service, they can access your appliance and view its status after you have given your consent. You need to have your appliance connected to your home network for this. Further information about Customer Service access and its availability in your country is available under www. During Customer Service access the symbol CS appears on the control panel. As soon as Customer Service has obtained the necessary data, they end access. Note You can interrupt remote diagnosis early by switching off Customer Service access in the Home Connect app. [. . . ] Containers or storage areas wobble or stick Please check the removable parts and re-insert them correctly if required. Bottles or receptacles are touching each other Move the bottles or receptacles slightly away from each other. Before you call customer service: Please check whether you can eliminate the fault yourself based on the following information. Customer service will charge you for advice ­ even if the appliance is still under guarantee! [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE BOSCH KGF49PI40




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual BOSCH KGF49PI40 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.