Detailed instructions for use are in the User's Guide.
[. . . ] ProHeat
3 Safety Instructions
®
USER'S GUIDE
1699, 7901, 8910 SERIES
4-5 Product View 6 Assembly
7-8 Special Features 8-11 Operation
12-16 Maintenance and Care
16-18 Troubleshooting
18 Consumer Services 19 Replacement Parts 20 Warranty
ug310-5941_7901bi_608. indd 1
6/24/08 1:38:52 PM
Thanks for buying a BISSELL ProHeat
We're glad you purchased a BISSELL ProHeat heated formula deep cleaner. Everything we know about floor care went into the design and construction of this complete, high-tech home cleaning system. Your ProHeat is well made, and we back it with a limited one-year warranty. We also stand behind it with a knowledgeable, dedicated Consumer Services department, so, should you ever have a problem, you'll receive fast, considerate assistance. [. . . ] Carry the tank like a bucket to a utility sink or outside where you will dispose of the collection water. Remove the top of the tank by rotating the handle forward to unlatch lid and lifting lid off tank. Empty collection water from bottom of tank.
NOTE: You may notice hair & debris deposits on the carpet or in the tank that were loosened by the cleaning action (especially with newer carpets that have never been deep cleaned before). 4.
After each use, remove and rinse the lint screen located on the tank lid. Refill the Tank-in-Tank by referencing "Fill the water tank" on page 9. Remember to secure the top of the tank by rotating the handle and test to make sure it is secure before picking up. Return Tank-in-Tank to the machine.
NOTE: Always check the level of cleaning formula in the SmartMix tank at the same time, and refill as needed
4.
5.
5.
Rinse (optional)
Rinsing is an optional step that can be done during the cleaning process by switching to the water rinse setting, or it can be done after the carpeted area has been cleaned. Simply choose the water rinse setting on the SmartMix dial, and follow the same path as you did for cleaning, taking care to do a forward (wet) stroke by depressing the trigger, a backward (wet) stroke, and a forward and backward (dry) stroke, releasing the trigger. Continue this until the water you see coming up the nozzle is clear.
1
When filling bottle or storing unit, set dial to:
WATER RINSE
www. bissell. com
800. 237. 7691
11
ug310-5941_7901bi_608. indd 11
6/24/08 1:39:03 PM
Maintenance and care
Machine storage
Once your cleaning is complete, make sure the water tank is emptied and rinsed out. The SmartMix tank can remain filled and ready to go (store with machine set to water rinse setting), or it can simply be emptied back into the formula bottle if that is more convenient.
Note: Store cleaner in a protected, dry area. Since this product uses water, it must not be stored where there is a danger of freezing. Freezing will damage internal components and void the warranty.
WARNING: fire, To reduce the risk of
electric shock or injury, unplug from the outlet before servicing.
Machine care
For best results, a few simple steps can assure your machine is well maintained after your cleaning is complete. After emptying the water tank, rinse it out at a faucet with running hot tap water, taking care to clean underneath the heavy duty bladder, and all around it. Clean out the flow indicator filter each time it is used to ensure best cleaning performance. Unscrew the flow indicator cap, lift out the red rotor and white filter. Any loose hair or debris can be pulled from the brush roll if desired and thrown away. After carpet is dry, vacuum again to remove hair and fuzz.
ON
Flow Indicator
OFF
ON
OFF
4.
3. 7.
Cleaning with attachments
Your ProHeat machine comes equipped with a hose and at least one attachment for cleaning stairs, upholstery, and more. If using to clean upholstery, check upholstery tags for instructions.
12
www. bissell. com
800. 237. 7691
ug310-5941_7901bi_608. indd 12
6/24/08 1:39:03 PM
Maintenance and care
Cleaning with attachments (continued)
A. "W" or "WS" on the tag means you can use your ProHeat. If the tag is coded with an "X" or an "S" (with a diagonal stripe through it), or says "Dry Clean Only", do not proceed with any deep cleaning machine. If manufacturer's tag is missing or not coded, check with your furniture dealer or manufacturer. [. . . ] et
Or visit the BISSELL website - www. bissell. com
When contacting BISSeLL, have model number of unit available. Please record your Model Number: ___________________ Please record your Purchase Date: ___________________
NOTE: Please keep your original sales receipt. It provides proof of date of purchase in the event of a warranty claim. See "About Your Warranty" on page 20 for details.
18
www. bissell. com
800. 237. 7691
ug310-5941_7901bi_608. indd 18
6/24/08 1:39:07 PM
Replacement parts - BISSELL ProHeat
Below a list of common replacement parts*. [. . . ]