User manual BISSELL POWERFORCE 47M6
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual BISSELL POWERFORCE 47M6. We hope that this BISSELL POWERFORCE 47M6 user guide will be useful to you.
Manual abstract: user guide BISSELL POWERFORCE 47M6
Detailed instructions for use are in the User's Guide.
[. . . ] PowerForceTM
BAGLESS
USER'S GUIDE
47M6 SERIES 220-240V
3
Safety Instructions
4
Product View
5
Assembly
6-7
Operation
8-12
Maintenance and Care
12-13
Troubleshooting
14
Consumer Services
15
Replacement Parts
16
Warranty
ug110_4052_47M6_808. indd 1
8/12/08 1:34:22 PM
Thank you for buying a BISSELL PowerForceTM Bagless Vacuum
We're glad you purchased a BISSELL PowerForce Bagless Vacuum. Everything we know about floor care went into the design and construction of this powerful, high-tech home vacuuming system. Your BISSELL PowerForce Bagless is well made, and we back it with a limited one year warranty. We also stand behind it with a knowledgeable, dedicated Consumer Services Department, so, should you ever have a problem, you'll receive fast, considerate assistance. [. . . ] To reduce the risk of injury from moving parts, always move the cleaner with the carrying handle at the back of the cleaner. Always place the vacuum cleaner on the floor with the handle in upright position when using tools. Do not place vacuum cleaner close enough to objects to pull them into rotating brush.
NOTICE: certain carpets While vacuuming,
and low humidity conditions may generate small static discharges. The discharges are entirely harmless and are not associated in any way with the main power supply.
www. bissell. com
7
8/12/08 1:34:28 PM
ug110_4052_47M6_808. indd 7
Maintenance and care
To maintain maximum cleaning performance from your BISSELL PowerForce Bagless, perform these simple maintenance steps. Empty the dirt container when the dirt reaches the "Full" line on the side. Check the inner and outer circular filters, and the pre-motor filter at least once a month and clean or replace as needed. Clean or replace the post-motor filter every three to six months.
Note: More frequent filter cleaning or replacing may be necessary if you are vacuuming new carpet, fine dust, or have allergy concerns. Follow the instructions on the following pages to perform these simple maintenance steps.
3.
To reduce the risk of electric shock, turn power switch OFF and disconnect plug from electrical outlet before performing maintenance or troubleshooting checks.
WARNING:
Tip:
For maximum cleaning performance, check and clean or replace all filters as suggested.
Emptying dirt container
The dirt container needs to be emptied when the dirt reaches the "Full" line on the side of the container. Grasp handle and pull the dirt container straight out to remove from vacuum. Put the dirt container back in the vacuum and slide the lever to the "Lock" position.
Note: The dirt container may be washed in warm water with a mild detergent. The post-motor filter assists in the filtration process to return clean air to the room. When the filter becomes dirty, open the door, remove the filter and clean. Replace the door by inserting the tabs on the left side and snapping the right side into place.
Post-Motor Filter
3.
4.
WARNING: To reduce the risk of
injury from moving parts, turn the power switch OFF and disconnect plug from electrical outlet.
Check rotating floor brush and drive belt
You should check your vacuum cleaner's rotating floor brush and drive belt regularly for wear or damage. You should also clean the brush and brush ends of string, hair and carpet fibers. These can wrap around the brush and hamper its ability to effectively clean your carpet. Place handle in low position and turn vacuum cleaner over so bottom side is up. Remove the four screws from the brush cover (as shown) with a Phillips head screwdriver. Clean strings, hair and other debris from rotating floor brush, paying particular attention to brush ends. Clean strings, hair and other debris from motor pulley and drive belt areas. 8.
Air Passageway
10
www. bissell. com
ug110_4052_47M6_808. indd 10
8/12/08 1:34:32 PM
Maintenance and care
Replace drive belt
Use only BISSELL Style 10 replacement belts in your BISSELL PowerForce Bagless. With rotating floor brush removed from vacuum cleaner (Steps 1-4 of "Check rotating floor brush and drive belt"), grasp old drive belt and remove from motor pulley. Place new drive belt over motor pulley and stretch other end over rotating floor brush in the space between the bristles. [. . . ] Dirt container full Filters missing or installed incorrectly Dirt container installed incorrectly Filter cup installed incorrectly
Remedies
1. Check inner and outer circular filter and post-motor filter for correct installation 3. Remove dirt container and make sure filter cup is fully attached
Other maintenance or service not included in the manual should be performed by an authorized service representative.
Thank you for selecting a BISSELL product.
Please do not return this product to the store.
www. bissell. com
13
8/12/08 1:34:36 PM
ug110_4052_47M6_808. indd 13
BISSELL Consumer Services
If your BISSELL product should require service:
In the UK, Australia or New Zealand, call BISSELL Consumer Services at the numbers below and we will give you the location of a BISSELL Authorized Service Center in your area. For all other countries, contact your local in country distributor for questions, service, or repair. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE BISSELL POWERFORCE 47M6
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual BISSELL POWERFORCE 47M6 will begin.