User manual BISSELL 3760

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual BISSELL 3760. We hope that this BISSELL 3760 user guide will be useful to you.


BISSELL 3760 : Download the complete user guide (955 Ko)

You may also download the following manuals related to this product:

   BISSELL 3760 (1463 ko)

Manual abstract: user guide BISSELL 3760

Detailed instructions for use are in the User's Guide.

[. . . ] USER'S GUIDE 3760 SERIES 220-240V 3 4 Safety Instructions Product Diagram 4-6 Assembly Instructions 6-9 Operation / Special Tools 10-13 Maintenance 14 15 15 16 Troubleshooting Replacement Parts Consumer Services Warranty ug603-5570_3760E_1105. indd 1 2/2/06 4:12:08 PM Thanks For Buying A BISSELL Lift-OffTM Spinpower We're glad you purchased a BISSELL Lift-Off Spinpower vacuum. Everything we know about floor care went into the design and construction of this powerful, high-tech home vacuuming system. Your BISSELL Lift-Off Spinpower vacuum is well made, and we back it with a limited comprehensive two-year warranty. We also stand behind it with a knowledgeable, dedicated Consumer Services department, so, should you ever have a problem, you'll receive fast, considerate assistance. [. . . ] Note: The Stair Cleaning Tool does not store on board. 7 ug603-5570_3760E_1105. indd 7 2/2/06 4:12:13 PM Special Tools Continued TurboBrushTM (Select Models): Use rotating brush action for small areas such as stairs and upholstery. Too much pressure could cause the brush to stop rotating. Deluxe Bare Floor Tool (Select Models): Use for bare floors. Note: The Deluxe Bare Floor Tool does not store on board. All items may not be included with your model. More tools are available; to order please refer to page 15. Cleaning With The Detachable Cylinder The Detachable Cylinder feature makes it possible to easily take the powerful cleaning action of your BISSELL Lift-Off Spinpower to stairways, auto interiors, and other hard-to-reach areas of your home. Before detaching the Cylinder, your vacuum must be in its fully Upright Position. Press the Release Button at the top of the Cylinder Release Button Handle and lift the Cylinder to remove. When using the Shoulder Strap, to avoid discomfort, position the Cylinder so that these parts are not directed towards or touching your body. (NOT the cord) and disconnect from outlet. Loop Power Cord around Cord Wraps on side of Transporting Cleaner 1. To move your vacuum cleaner from room to room, put the Handle in the Upright Position, tilt the vacuum back on its rear wheels and push forward. The vacuum can also be moved by using the Carrying CAUTION: Button Do not press the Release while using the Carrying Handle to transport the vacuum cleaner. The Cylinder could detach causing the rest of the vacuum to fall. Carrying Handle 9 ug603-5570_3760E_1105. indd 9 2/2/06 4:12:16 PM How to Maintain Your BISSELL Lift-Off Spinpower To maintain maximum cleaning performance, the following maintenance steps must be performed: 1. Empty the Dirt Container when the dirt reaches the "Full" line on the front. WARNING: To reduce the risk of electric shock, turn Power Switch OFF and disconnect plug from electrical outlet before performing maintenance or troubleshooting checks. 2. Check the Upper Tank and Pre-Motor Filters at least once a month and clean and replace as needed. Replace the HEPA Media Post-Motor Filter every six months. NOTE: More frequent Filter cleaning may be necessary if you are vacuuming new carpet, fine dust, or have allergy concerns. Follow the instructions on the following pages to perform these simple maintenance steps. Tip: For maximum cleaning performance, check and clean or replace all Filters as suggested. Empty Dirt Container The Dirt Container needs to be emptied when the dirt reaches the "Full" line on the front of the Container. 1. Grasp handle and pull the Dirt Container straight out to Full Line Lock Position remove from vacuum. 4. Put the Dirt Container back in the vacuum and slide the lever to the "Lock" position. Note: The Screens may also be removed from the side Dust Chambers when you empty or clean the Dirt Container. If they do not slide down completely, try in the opposite Dust Chamber. The Dirt Container and Screens may be washed in warm water with a mild detergent. Make sure they are completely dry before replacing. Screen Cleaning The Upper Tank & Filter Use only BISSELL Style 8 Replacement Filters in your BISSELL Lift-Off Spinpower. 1. The Upper Tank Filter can be reached by removing the Dirt Container, reaching underneath the Upper Tank and turning the rim of the Filter Frame to unlock. [. . . ] 13 No Power at Rotating Floor Brush Possible Causes 1 Cylinder is not securely seated 2 Brush Switch turned to "Off" 3 Vacuum is in Upright Position Remedies 1 Remove Cylinder and replace, making sure that it "clicks" into place 2 Make sure Brush Switch is in "On" position 3 Recline vacuum to operate brush Vacuum cleaner won't pick up dirt Possible Causes 1 Incorrect Height Adjustment 2 Hose not attached to suction opening 3 Crack or hole in Hose 4 Drive Belt broken, worn or off motor pulley 5 Rotating Floor Brush bristles worn 6 Rotating Floor Brush jammed 7 Clog in vacuum 8 Dirt Container full 9 Dirt Container or Upper Tank not installed properly 10 Filters are dirty Remedies 1 Adjust Powerfoot to correct height setting 2 Grasp Hose Grip and firmly push onto the base 3 Check Hose and replace if needed 4 Reposition or replace Drive Belt, see pg. 11-12 5 Replace Brush 6 Remove Brush and clean debris from Brush Ends 7 Follow instructions on pg. 13 for clearing clogs 8 Empty Dirt Container 9 Position correctly and lock in place 10 Check and clean or replace Upper Tank, Pre-Motor and Post-Motor Filters Vacuum cleaner is difficult to push Possible Causes 1 Incorrect Height adjustment Remedies 1 Adjust Powerfoot to correct height setting Visible dirt escaping from cleaner Possible Causes 1 Dirt Container full 2 Filter missing or installed incorrectly 3 Dirt Container installed incorrectly 14 Remedies 1 Empty Dirt Container 2 Check Upper Tank, Pre-Motor and Post-Motor Filters for correct installation 3 Pull out and re-insert Dirt Container correctly ug603-5570_3760E_1105. indd 14 2/2/06 4:12:21 PM BISSELL Consumer Services If your BISSELL product should require service: In the UK, Australia, or New Zealand, call BISSELL Consumer Services at the numbers below and we will give you the location of a BISSELL Authorized Service Center in your area. For all other countries, contact your local in country distributor for questions, service, or repair. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE BISSELL 3760




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual BISSELL 3760 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.