User manual BIALETTI MOKONA

[. . . ] Read these instructions carefully as they contain important information about safe installation, use and maintenance. This appliance has been designed for indoor and non-extreme temperature conditions use only; do not leave the appliance exposed to atmospheric conditions (rain, sun, etc. The manufacturer accepts no responsibility and the warranty will not apply for any commercial use, inappropriate handling or use of the appliance, any damage resulting from use for other purposes, faulty operations, non-professionals' repair or failure to comply with the instructions. After removing the packaging, and before using the appliance, make sure the appliance and all the accessories are working well. [. . . ] Place the desired filter ("12" for one cup - "13" for two cups) in the fi lter holder (2a) (Fig. Insert the filter holder (2a) into the hub (6) (as illustrated in Fig. H1) and push it to the right until it is in a front-facing position in order to lock it on correctly (Fig. If the LED (17a) is off, wait until it turns back on and then press the switch (17) to start the coffee flow. Remove the filter holder (2a) from the hub, by pushing it to the left. M2), making sure that any paper tabs on the pod are placed inside the filter holder. Insert the filter holder (2a) into the hub (6) (as illustrated in Fig. H1) and push it to the right until it is in a front-facing position in order to lock it on correctly (Fig. If the LED (17a) is off, wait until it turns back on and then press the switch (17) to start the coffee flow. Remove the capsule filter holder (2b) from the hub, by pushing it to the left. Let go of the lever (k) so as to allow the cover (y) to close over the capsule (Fig. Position the capsule filter holder (2b) in the hub (6) pushing it slightly upwards (as illustrated in Fig. H1) then turning it to the right end bring the capsule filter holder to the frontal position for the correct functioning (Fig. If the LED (17a) is off, wait until it turns back on and then press the switch (17) to start the coffee fl ow. When coffee supply has finished, turn the capsule filter holder (2b) towards the left to unlock it. Eject the capsule (g) by gently tapping the capsule filter holder (2b) a couple of times (Fig. To obtain hotter coffee, preheat the cups by delivering hot water through the empty capsule filter holder (2b) or filter holder (2a) (without coffee). The ground of the coffee is fundamental for the correct operation of the machine and the quality of the beverage. Too "coarse" a grind may cause the coffee to flow out too quickly, where as too "fine" may cause the flow to be too slow. The absence of the characteristic foam may be caused: - by the incorrect grind of coffee; - poor roasting of the coffee; - the machine not being sufficiently hot; - or incorrect tamping of the coffee (performed with the tamper "11"). For the best quality beverage, it is recommended that the machine be allowed to preheat for approx. With the empty filter holder (2a) or capsule fi lter holder (2b) locked on the hub (6) prior to use. [. . . ] Bialetti refuses to accept any liability for damage that may directly or indirectly be caused to people, property or pets as a result of failure to abide by all of the guidelines and instructions in this booklet concerning the installation, use and maintenance of the appliance. This warranty is without prejudice to contractual guarantees made to the retailer. On the receipt/invoice, unless the purchaser can prove that delivery took place on a later date. The symbol representing the crossed out trash can on the appliance indicates that the product, at the end of its useful life, must be treated separately from domestic waste. [. . . ]