User manual BIALETTI CF36

[. . . ] See thè label located on thè bottom of thè body of thè appliance. If thè appliance's plug is not compatible with thè electrical outlet, have thè plug replaced with another suitable type by a qualified technician. The technician must also be certain that thè electrical cord is suitable for thè power absorbed by thè appliance. In generai, it is not advisable to use adapters, multiple sockets and/or extension cords. [. . . ] G|»] Jb make good coffee at thè right temperature thè mschine must be very hot Press thè LEO switch (T) (17) to turn on thè machine. Inserì thè filter holder (12) or capsule filter holder (13) into thè hub (9) and turn it to thè right until it is in a front-facing position in order to lock it on correctly (fig. Wait for thè LEO (17) to light up steadily (otherwise, thè pump will not be activated), then turn thè dial (19) to thè W> setting to dispense hot water from thè filter holder spout. - Dial with three settings O Appliance in stand-by Dispense coffee <V|1^ Dispense steam/hot water - 30 - [jg»| fk Use coffee pods suitabìe for "café" style espresso coffee machines. Make certaìn that there Is enough water In thè tank (5). Remove thè filter holder (12) from thè hub (9) by turning it to thè left. Remove thè filter hoider (12) from thè hub (9), by turning it io thè left Piace thè filter in thè filter holder (12) - "14a" for one cup (fig. Using thè measuring scoop (16b), pour thè coffee into thè chosen filter according to thè number of cups te prepare: for one cup, one scoopful; for two cups, two scoopfuls (fig. "F2") Press thè coffee lightly into thè filter using thè tamper (16b) (fig. Inserì thè filter holder (12) into thè hub (9) and turn it to thè righi until it is in a front-facing position in order to lock it on correctly ( n ) (fig. Wait for thè LEO switch (17) to light up steadily (otherwise thè pump will not be activated), then turn thè dial (19) to W> to start thè coffee flow. To stop thè coffee flow, return thè dial (19) to thè O setting. Do not remove thè filter holder (12) from thè hub (9) if thè dial (19) is not on thè Q setting . When thè coffee has fin/shed flowing from thè spouf, remove thè coffee grounds from thè filter (14a o 14b) and thoroughly rinse both thè filter and /V "H2"), making sure that any paper tabs on thè pod are placed inside thè filter holder. Inserì thè filter holder (12) into thè hub (9) and turn it to thè right until it is in a front-facing position in order to lock it on correctly (fig. GSfl When thè machine is new it may require some force to properly lock thè filler hoider on thè hub. Set thè cup on thè grill (7) directly under thè spout where thè coffee pours out. Wait for thè LEO switch (17) to light up steadily (otherwise thè pump will not be activated), then turn thè dial (19) to W> to start thè coffee fiow. To stop thè coffee flow, return thè dial (19)tothe (3 setting. Do not remove thè filter holder (12) from thè hub (9) if thè dial (19) is not on thè O setting. Remove thè capsule filler holder (13) from thè hub (9), by turning it to thè left ( fl* ). Push thè lever (13a) on thè handle in order to open thè cover (13b) (fig. [. . . ] If thè fuse cover is detachable, never use thè plug with thè cover omitted. Fit thè appropriate plug according to thè instructions in paragraph "Fitting a plug". With alternative plugs a 15 amp fuse must be fitted either in thè piug or adaptor or at thè main fuse box. APPLIANCES WITHOUT FITTED PLUG PITTING A PLUG - IMPORTANT The wires in thè mains lead are coloured in accordance with thè following code: GREEN & YELLOW : EARTH BLUE : NEUTRAL BROWN : LIVE As thè colours in thè mains iead of this appliance may not correspond with thè coloured markings identifying thè terminals in your plug, proceed as follows. [. . . ]